Separate names with a comma.
Some features disabled for guests. Register Today.
Ok thanks for the reply, then I'll probably change it :) Thanks -fx
Hi, I wonder if there is any cons homing on the front of the machine instead of the back? I've a large machine, killerbee 1515, and it's working...
I'll try to find higher quality surfacing tool, and lighter, something around 1" / 25mm diameter. Any suggestion? I saw a CMT/orange tool, but the...
This is the bit I use to surface, maybe it's too heavy : https://m.aliexpress.com/item/4001140417861.html?_fs_=true -fx
The only mechanical reason I can imagine would be that the flex is accentuated by the weight of the surfacing bit, and when I switch to regular...
Alex, it shouldn't be able to flex, because there are support underneath, so it can't go any lower. And let's say that for an unknown reason, it...
And here is my spoil board, you can see how it's fixed to the structure, with 3 screw/t nuts on the front and back aluminium rails. -fx
I attached a picture of the aluminium structure below my spoil board. The difference is visible when comparing left/right sides to the center, not...
I understand the difference in height in absolute numbers, but surfacing should give equal RELATIVE height everywhere (IE distance between the...
Hi, I've a problem with my ratrig killerbee 1515, loaded with 2.2kw water cooled spindle. I've probably some deflection in the gantry, because...
Hi, I'm new to CNC, and im trying to cut multiple parts from thick 18mm baltic birch plywood, that are cut to half sheets (1250mm x 1250mm). I'm...
Nice, we almost have the same setup (except my router is water cooled) :)
Hi guys, What model would be more rigid, especially in the Y axis, to use with heavier water cooled spindles, on aluminium or heavy cutting in...
If I get it right, the X axis is pretty much open on both ends, so it's not really cause for concern, isnt it ? And if the Y axis can cut up to...
Hi :) I'm planning to buy a 1515 lead mainly for cutting plywood parts. What the maximum size for the plywood sheet that would fit in the CNC ? I...
