Separate names with a comma.
Some features disabled for guests. Register Today.
en fait ce n'est pas simple merci pour votre réponse
ème
Hello, is it possible to control the direction of rotation of a vfd spindle with the black box X4? And if so, how Thank you for your answers
thank you for your answers
I made a mistake in my way of launching the probe sequence I am really sorry because in fact it worked very well from the beginning all my excuses
Ok I just did the manipulation and it does not solve the problem here is what i do I will look for the file in the PROBE folder I select ¨ROBEXYZ...
ok but interface or Blackbox X4? thank for your answer
good morning since update 1.57 the probe no longer works. I work with the black box 4 and the interface the bet went well but since then the probe...
perfect thank you very much for your help and for your patience
so here is the wiring to connect the laser and the spindle is it correct? [ATTACH]
thank you for the answer so I have corrected the wiring on the photo [ATTACH] [ATTACH]
this is how my pin is wired Connection of the "VI" connector on VFD to BLACKBOX "0-10V". Connection of the "ACM" connector on the VFD to BLACKBOX...
thank you for your answer, I have a doubt about your diagram because the ACM goes on the GND of the black box and on your diagram they are on the...
Thank you for your reply I forgot to say that the VFD pin will not power because I made a control panel and the pin is on a separate switch. this...
hello I currently have a vfd spindle and want to wire an OpenBuilds WorkBee CNC Eco Saver Laser Upgrade with PLH3D-6W-XF + laser as well. I would...
indeed this "option" is checked thank you for your answer and especially the speed
Hello everyone I have mounted a 1010 workbee with a blackbox the motors move in the right direction and the limit switch functions. I can not get...
