Separate names with a comma.
Some features disabled for guests. Register Today.
I received your message, look at this [link removed]
Thank you Peter, i made it, merry christmas !
Peter, problem solved. EMI where maybe one of the cause, but in fact the cable to connect Interface was buggy. The 'phone' side was not correctly...
I encountered a problem with X32 on my cnc. Previously it was managed by a 4X, i could launch a job from Interface. Now, all is connected on the...
Hail Tried the last version with web builder, and the $42=4 is refused, no way to choose the number 4 to manage the door parking.
Hail again I have tested the last version 1.0.370 and still a tiny problem with door button. It stops the work, shut off spindle, but no parking...
I have 2 emergency buttons, main one cut power, and second (door) acts like a more sofisticated pause button, allowing to replace dustshoe for...
Ok, another feedback 1 - Door connector is connected to an emergency push button and wired NC while pending, so far, so good, it works. I...
Without soft limits, the head bump on sides where there is no switches. I just have switches on homing position and Homing, Homing Dir and Max...
Thank you for all your precise explanations ! Feed Back : Parameter $42, the number 4 is not accepted Error 52 , undefined $42 = 4 Then trying to...
That is true, latest firmware from Web Builder correct all and wifi connexion too. Nevertheless, if safety door input is included, with Openbuilds...
Well, my Blackbox X32 is working, but when i try to insert my wifi parameters i have a crash, even the Web Builder was not fine, i came back to...
Thanks Peter for you quick answer, tried to build but fails, i redo it ! Why this bug still exist in official firmware wizard download ?
I have a Genmitsu PROverXL which works perfectly well with the 4X. The installation of the X32 was a little complex, the system obliging me to...
Made it. I had to modify some connections. The spindle (with A2 VFD) was connected on 0-10V and Tool connector, now is on 0-10V and relay 2 (but...
I think so. This is for a Genmitsu PROVerXL 4030, i choosen 3 axes, ganged motor Y, probe ans safety door checked, SD Card enabled ans WebUI v3. I...
Well, Blackbox 32X, is not really plug and play, but after a while, all is working fine, homing, probe, end-stops, spindle with VFD, coolant, all...
I have the 4X Blackbox and Peter writed a firmware to pause the cnc, with elevation of the spindle and auto resume when the problem fixed, all...
Problem solved, just a story with a loose screw...... With you hex file (grbl with door and z parking motion) all is working fine on computer, but...
Very strange, with last Openbuilds version, at the beginning of a job, i hear a brrrrrrr noise and i am unable to see where it come from. I will...