Separate names with a comma.
Some features disabled for guests. Register Today.
I removed and installed all 4 wires on the Z axis and retested after verifying everything was good mechanically, I found that the yellow wire was...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
I didn't measure spindle height but the spoil board is not level relative to the machine. The major indicator was when the surfacing wizard went...
I checked the depth of the cut at the start of surfacing the waste board with a caliper and then at the end of the cut on the opposite side of the...
Alright, will do. I appreciate all the help and will post pictures tonight. Thank you for all the information!
I will verify tonight. I will say, the Z axis operates quite smooth during operation. Much smoother than one would expect from improper wiring or...
Yeah, seems odd. The Z axis is the only motor on the machine that is doing it. I didn't change anything in the configuration that would set that...
When the machine is at rest the Z axis motor hums constantly. I should have mentioned that above but your suggestion does sound plausible.
Still helpful to help us with a diagnostic Any 3rd party parts on the machine? No, all parts were ordered from openbuilds in the lead 1515...
Correct, that is what is happening, it is getting deeper with each pass. The gantry is level, the router is level, every part on the machine has...
Hello, I have a LEAD 1515 CNC and while surfacing the waste boards I noticed about a 3mm drop in the z axis from one end to the other. After...
