Separate names with a comma.
Some features disabled for guests. Register Today.
That's what it was, I changed so many things to try and fix the previous issue. I forgot to change that one back. THANK YOU
Here's the box in the pic
NExt problem. When I run job, the z goes up and hits the limiter and a halts the job. I noticed the white box that is typically around the part...
homing wasnt enabled so I had to figure out how to do that and I think after that I got it figured out. until the next issue, thank yout!
That's what I'm Trying to do and can't figure out. I don't know why it's not starting above. That's my problem. I guess I'm missing the homing part.
Is the fix to add the stock height to the setup? That's what I'm having a hard time understanding, how to fix it. Great explanation, I've tried...
Please bare with me as I'm sure this has been answered and there is a quick fix but I don't understand enough to know if they're having the same...
YES! please
Anyone interested? Looking for help to kick start using this equipment. thank you
That’s easy, just looking for someone interested. If you’re interested send us a message so we can discuss.
We need files ready to cut, preferably 3D.
Looking for someone to help or to design some parts for our C Beam machine in 2D and 3D. If you are willing to help us with this for free or pay,...
So the probe will go on the corner of the material to be cut?
I went back and looked, it says 12"x12" so I figured it would reach to the 4 corners. I see now that's not the case. So, like you said. I'll...
I'm 1 1/4" from the front on the y axis. It reaches to the rear with 1/4" past the rear on the y axis. I get full travel on x axis.
This is how far away it can go at max to the front.
So, finally got back on this and after fixing that. It’s still not going to the bottom of the board. It’s about half an inch away from the edge....
I found a screw from the bottom holding on the spoil board that was sticking down and I believe it was contacting the collar. I’m taking it out...
It does sound like its jamming, but I don’t see anything in its way that would make it jam, either way there is only 8mm of travel that I can see...
Soft limits are disabled, I do have limit switches installed checked and do have limit switches on one side of each axis (idk if installed correct)
