Separate names with a comma.
Some features disabled for guests. Register Today.
Grbl file attached. No changes have been made to this for several weeks. As noted earlier, something changed overnight with the machine turned off.
DIY CNC System components Rattmotor 1.5 KW VFD 110v 110v 1.5KW water cooled spindle OpenBuilds CNC Electronics Bundle X32 Blackbox System...
Wow! I did not even know such a setting existed but it was enabled by some mysterious set of circumstances. I look forward to running a test to...
I am running a water cooled spindle connected to a VFD controlled by OB machine control through X32 Black Box. I am generating CNC code using...
Would it be possibble to get a copy of your current backup file? I would like to see if I can find something out of order. Thanks. Lorne
No. I checked that. I just used a spare piece of wiring. I allow myself to stray from AC power protocols when connecting DC. I guess it should...
This is all new so there is no earlier wiring. Ohmeter shows open circuit when unplugged and zero volts when plugged in and turned on.
Yes. It will operate the XYZ axis motors and the interface, fan is spinning and some lights are on.
I have connected my new X32 to a CNC system I am building. It will operate the XYZ axis okay and will connect to the interface okay. I have...
Try disconnecting your S8 from your mobile network. In other words you are forcing your phone to only deal with wifi. I suspect that the phone...
My firmware was up to date. I tried 4 different phones. The first 3 were Samsung and did not work. The 4th was an old One+ and voila, it connected...
I have a new OpenBuilds Interface module connected to Blackbox 4X V2.10 on standard Lead 1010. All control functions are working as expected....
The gcode is from a purchased STL file converted to .nc file using MeshCAM V9. OpenBuilds control v1.0.364 was processing the file satisfactorily...
That certainly makes sense but there is still that XYZ axis issue that needs to be addressed. I haven't found the solution for that.
[ ERROR ] error: 26 - A G-code command implicitly or explicitly requires XYZ axis words in the block, but none were detected. [ G10 ] I am...
Reinstalled software. No that didn't do it.
I have been through all of that many times as well as the github post. The Blackbox 0-10v output will not go to 10v including when nothing is...
The issue seems to be the voltage output from the Blackbox. It is not as it should be even when the VFD is totally disconnected. It is unable to...
I finally got my Openbuilds LEAD 1010 machine up and running well except for one problem. I have a 1.5 kw spindle and a YL620-A VFD. Both are...
