Separate names with a comma.
Some features disabled for guests. Register Today.
I was setting up the X-axis calibration and was adding the travel difference between the 100mm and the actual travel distance, when for some...
Thanks Rick, I will have to make sure that the set screw, on the flex coupling end, is firmly seated in the root of the lead screw thread, before...
Hi, I have a C-Beam Tension XL Linear Actuator, that I built using the instructions that have the linear bearing and nut on the outside of the...
I am just using it to transport my part 360mm to the next drilling position.
I used the .TXT and that worked perfectly. One question- when putting the 'F' speed for a program running in mm, how fast can the NEMA 23 motor...
When I write G-Code to put into the interface, what extension do I use? My milling machine uses a '.exe' extension. Thanks, Joe
Thanks
I scrolled through the interface and see that there are many inputs possible with the Interface. Is there an Interface manual that explains what...
Having the interface and USB both plugged in was the problem. Joe
After struggling for a few hours trying to get the whole setup done, I have one important question. Does the interface need to be unplugged when...
Gary, thanks. Let me review this.With the openbuilds software on my computer, I use a USB cable to connect it to the Black Box, which is...
Hi, Once I had assembled the unit, I found that the lead screw had a bend in it. It has been replaced with a new one. I installed the Interface...
Hi, Because the part I want to mount on the gantry is so long, I was wondering if I can use two gantries on the same rail? They would be a few...
David- thanks for the full instructions and coding. The rail will be used to position the part under the head. Since the part is 36" long and the...
I have looked at the video and still would like to see an example of the self written G code. Say to command the unit to move 6.0". The one I...
Hi, I got the unit completely built. Now, I have a few questions about inputting the file into the Interface. Can you write your own G-code...
The openbuilds interface input. Can you input g-code directly into the interface with a USB drive? In what 'file type' does it need to be. My...
What is the average wait time on the Interface CNC Touch? Thanks, Joe
Peter- Thanks for all info. Is there any place than I can see the actual dimensions of the kits and the components? Joe
Can I get all that from the openbuilds store?