Separate names with a comma.
Some features disabled for guests. Register Today.
Ok thanks Peter.
Peter, The news is not great. I swapped the PSU and zero change. See video. The problem seems to be the controller isn't registering the...
The original was indeed a Meanwell.....a reliable manufacturer.
I do not go to Amazon for electronics that really matter such as PSU due to fake sales. I purchased a Meanwell from Digi-Key so I should be...
Peter, Sorry for the delay in the reply...life got real busy. All components are OpenBuilds, no 3rd party equipment. I also unplugged and...
Peter, I am quite perplexed here. I ran the test on the controler both attached to the control box and away connected to just USB, which ran...
Peter, Assuming it was EMI from some source I did the following: I moved the interface away from the unit completely. The wire connected to the...
Peter, Thanks for the reply however the issue is not with the laptop control it's with the interface control. The interface has the latest...
Christian, Correct the continuous jog option is selected, please see attached. There is no problem with jogging if I am using the laptop. The...
Hi All, I've been using a Lead 1515 for awhile now with no issues. Just yesterday I started having jogging issues. I did not change anything, all...
Awesome, thanks Peter!
Hi, I can't find the high Z mod for Lead 1515 in the parts store. Can someone post a link for me please? thanks Andy
Peter, Yep you were right all along. The z axis was set to allow the bit to cut into the spoil board however this was enough to cause the error....
Alex, I followed the build video for Lead 1515 and at 13:07 min it shows the X limit switch being installed at the front left and at 14:28 min it...
Peter, Here are some pictures of where the probe is in relation to the limits of the machine. If they were too close to the limit switches for...
When I home the machine, its already at the front left position. Did you mean the front right? thanks Andy
Peter, The issue came back and I spent a significant amount of time troubleshooting again which was super frustrating since I thought it was...
Peter, After playing around with this for the last few hours with very little headway, I got the same message when I used the laptop again but it...
Peter, thanks for the reply. Fair enough.....what do you suggest trying next to solve the problem given it works with the laptop attached but not...
Hi Peter, All axis were homed prior to using the probe. The router bit was then jogged over the hole in the probe as per procedure. I ran the...
