Separate names with a comma.
Some features disabled for guests. Register Today.
Oh,the seller sent me NC toolsetter instead of NO.Is there any way to connect it,thanks!
Thanks sir.
Hello.Iam using the black box controller.I would like to add the automatic tool setter,sensor.To measure the tools atomatical.Is there any way to...
Hello ppl.I really hope someone can explain this issue to me.I have some problems with my two sided project. Am using an L reference point on my...
Yes sir i have a VFD spindle,thaks for the response.
Hello i have a problem.The machine keep stopping during work.the spindle keep spinning.when i press the pause job button and then the resume job...
Oh yeah.Thanks for the fast reply!
HELLO.I used my laptop to controll my cnc with the black box controller.The SSD from the laptop is not damaged.I just wondering are the controller...
Thanks for the info!
Hello ppl.All my pockets came out wrong(size -0.8/-1mm on x/y same)when i use climb milling.But when using conventional milling the dimensions are...
I did some work on my machine also on my table.I rebuilded te machine completly and found some errors.Now they are gone.The machine is square...
This is really helpful!Thanks.First thing i did today is that make sure that my table is flat as it could be.It was WAY off.Noticed that when i...
Thanks for the tip! I measured my endmil 3.175 it was 3.170 with this tool the 50x50 test cut came out 0,8-1mm off almost same error with the...
I think i found out something,now all the test cuts came out with the same wrong size same on the x/y from small part to bigger. Maybe the machine...
I was testing all day long,still 0,6-0,9 off.Now iam sure it must be a mechanical error.But i dont know what can it be haha.
Yep,i did it with no luck.See the comment down bellow.
Like you mentioned,i did the calibration in the wizard using a vbit and a tape measure(x500y700).After checking the travel it was spot on.But when...
Yes, i already did that based on a square test 50x50.It was allright +-01,-0,2.But when i try to cut for example 100x100 square or 120x120 its...
I tried out some thing but nothing changed.I bumped up the current on the black box,tried out some acceleration settings.I went from 150 to 300 on...
The lead screw was loose on the y axis so i fixed it.After that i tested it and the results was the same before. Wat about the acceleration/max...
