Separate names with a comma.
Some features disabled for guests. Register Today.
Am I understanding this correctly. The ground for the spindle should be an earth ground and not a ground to the ground lug on the vdf?
How would I go about using optical switchs for homing as well as auto alignment?
Issure resolved. Wasn't my usb. I had 2 limit switch grounding out through the bolt. Added a small plastic spacer and all is good
It doesn't come apart at all. With it unplugged it still have the probe lights on. So I'm assuming a usb insulator would be needed. Now. With...
The laptop only had a 2 prong plug. Will try battery only
Unplugging the usb from my laptop turned the probe off. Unplugged each motor limits witch didn't change anything.
I don't understand the grounding of ac and dc. With my spindle am I not to ground it to the vfd?
I just did a spindle upgrade and I'm having a problems with my probe and I do t understand why when I never touched it. So anyways when I...
Got it figured out. I needed to ground my black box
Just trying to start the spindle alone. Even clicking turn tool on won't turn it on
Need a little help on adding my hy vfd. I set all my settings in the vfd and in grbl as instructed. I wires the 0-10v on my x32 to the...
Thank you
What size wires do I need to run from my black box 32x to the vdf? Would 20/3 core work or do I need larger and 4 core?
I just ordered some 1/4 bits and was thinking about using adaptive clearing. I'll be changing everything over once I have free time. Would the...
I'm going a total of 1/2 deep. I definitely need to raise my tool as it cutting way to deep now. I'm going to be printing me up some line locs...
No the bit seems clean but my slot seems to be holding the chips. I been cutting at 12in/ mum and .121in in doc. I'm going to assume now after...
6061
When cutting aluminum with out coolant what should a feeds and speeds be and the step down be? Im trying to cut contour and have already broken...
When you test your acceleration did you do it with the directional keys for short distance or for a long distance. I know your values may be...
Tell me if I'm right. To change my max speed I do it in grbl settings. Enter a new speed value, save and restart. Then use the jog direction...
