Separate names with a comma.
Some features disabled for guests. Register Today.
I can understand why you’ve done this. Getting the collets out of the nut can be a bit of a PITA. Not nearly as bad as getting the bit and collet...
Nope. Game changer!!! I can put my hammer and vice-grips away now ;) Thank you.
I got my spoilboard surfaced a week ago, it took a few attempts, but in the end it turned out great. The first round I found the machine needed a...
I managed to get my interim dust collection set up, I've trammed the machine as close as I can get it (as close as my eye can tell on a ~8" radius...
Replaced the display and the lines are gone. The display I ordered was a "3.2 inch SPI Serial color without touch LCD screen TFT ILI9341 driver"...
New screen is in and working great! Here's the comparison, OE display in the middle, 2.8 to the left, 3.2 to the right. [ATTACH] New screen...
Getting closer. I’ve wired the main power, attached the two layers of the table top and installed spoil boards and router. I have a bit more wire...
As someone who's just reassembled a used machine that was 'working great', I'd strongly recommend watching the build video and going through your...
Burned some midnight oil last night and made it move! So far I’ve just jogged it around with the interface, super rad. [ATTACH]
Mechanical assembly has begun! The table top is still unfinished, I decided that before I made any irrevocable decisions about wiring and...
For anyone going down this same road just as I have and using this thread for info - what you need is not a 2.8 inch, but a 3.2 inch TFT LCD with...
Thanks Peter, I half-way came to this conclusion last night after a quick desolder - resolder of the current display. A replacement is en route.
Hello, My interface display has white lines across the screen that do not change or move when the interface is reset or menu's accessed....
Thanks very much Craig, Is your CNC anchored to the torsion box top with angle attached to the V-slot? Your enclosure / paddle switch...
Hello, I'm new to the community, I picked up a lightly used LEAD 1515 a month or so ago, and have it in pieces in my workshop while I've been...
