Separate names with a comma.
Some features disabled for guests. Register Today.
Just numbers moving for the axis during manual click and then a click like it tried to move after the numbers stopped. I've tinkered with the...
Setting up for a job with the current lowered, moving an axis manually just creates a pause and a slight tick and doesn't move. I raised the...
I just lowered the current on all axis and they have not come back on. I am in Florida, shop is quite hot. I powered down the DC converter last...
My 1515 as of the start of today is going red on my X32 for Y, Y2 even after restarting it, and on some restarts it's both Y and Y2 as well as Z....
Cut like a beast at the previous listed settings with hard limit off. I am going to replace the brush this evening.
I have the router 11 and the extra set of brushes, I'll look at that today. I slowed the machine way down. I've been cutting everything at 130...
How do I switch to hard limits off, I am always standing here with the machine while it's cutting, I would be comfortable with that option right...
I have not checked anything regarding the router and I'm definitely at 100-ish hours.
I understand they're EMI issues, but per the document I've addressed everything within it and do not have any of those problems to correct as...
I had this hard limit issue a a few weeks ago and thought it was fixed via vacuum hose touching the rails, that was fixed and didn't have any...
I am having an extremely difficult time threading in my 1/4" collet onto my router11, as soon as it feels friction I go to tighten and it just...
Disregard, I am so new at this, lol. I think the problem was I did not rehome the machine since starting my day, I simply moved it from it's last...
Starting this morning my XYZ probe is getting the Z, going over and getting the x but everytime it goes over for the Y it's not clearing the probe...
I have the x32, so no need for capacitors?
Thank you! Any suggestions on the best approach to accomplish that?
I turned the vacuum off that's duct taped to the router and router clamp and the hose kinda lays over the top beam. Temporary until my dust boot...
The last two times it happens within 20-30 seconds of each cut once it gets last air cutting and starts cutting again.
Thanks. I just got it again for a third pass. It went all the way through the areas already cut, no problems (I do not get know how to pick back...
Everything has been working great my first few days with the openbuilds 1515. Currently doing my first 3d cut and it appeared to be working...
BINGO!
