Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Alex, Thank you for this suggestion! It's an easy fix and I did a test cut and everything came out perfectly. Still not sure what the...
Ok, one last test today... I attached the work piece with double sided tape (this prior to your suggestion) and then surfaced the plywood. I...
Hi Peter, I did have some play in the z axis at the beginning. One of the lock collars on the screw had come loose. For the last few tests...
Hi Alex... the bottom does look flat and smooth. When I measure from each of the 4 sides, the calipers show between 0.395 - 0.405, and honestly...
Hi Peter, Sorry for not being more clear, I actually jointed the backside, then planed the top and checked the top with a known reference that is...
Updates after testing today: 1. I cut a pocket in a piece of walnut that had been planed to a consistent thickness. Pocket depth came out at...
Hi Alex, Great suggestion... I've got some very stable walnut scraps lying around and I'll run the test on that and report results. These have...
Ok good points in here... a few notes: In F360, I have the model thickness and stock thickness set to 0.71. I have tested setting the F360...
Hi Alex, Thank you for your questions... I'm using a 1/4" spiral upcut bit (Whiteside RU2100). I'm attaching the work piece to the spoilboard...
Update... I reran the z axis calibration in the wizards and it was actually spot on 50 mm. So no change in calibration. I loosened and then...
I went back and re-watched the build video for the z axis assembly, and in looking at that, I believe one of the lock collars has come loose. I...
Hah! I actually did the calibration during setup back in February of this year. But, good thinking to try running it again. I'll do that and...
Greetings, I am a relatively new CNC user with an open builds 1515. I'm designing and preparing my gcode files in Fusion 360 and have been using...
