Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for the info Peter.
Hello, is there any fix for a Blackbox controller fan? Mine is not turning at all. The implications of this is that my X, Y and sometimes Z axis...
Hi, I'm thinking of migrating to GSender now that they have the fully functional mobile app for tablets. Anyone using it? How does it compare to...
Thank you for the info. I had already done that and it solved the problem. I did it from the OB c controls app rather than from G-code prompt....
Problem solved. It was that $32 was set to 1 enabling Laser which explains why the spindle was also stopping when doing a fast Z travel. Thanks...
Sorry, I thought that you meant the PP Code, here is the Gcode for one of the runs... T1 G17 G21 G90 G0Z20.320 G0X0.000Y0.000 M3S12000 G04P5...
That’s probable just me playing around with it, but it was at 5 and not 1.5. I even had it at 20 just to see the change. Regarding the M3, it is...
I did change to 5. But when I run the session my head moves up and pauses for the duration but the spindle does not spin up. It still only starts...
Here is the PP g code… POST_NAME = "OpenBuilds GRBL (mm) (*.GCODE)" FILE_EXTENSION = "GCODE" UNITS = "MM" DIRECT_OUTPUT = "VTransfer"...
Yes the issue is based upon increasing G4. It simply pauses then spin up rather than starts spinning then pausing. g code is being posted in the...
Hello, Under my basic assumption that my spindle does what it is told to do from gcode, and that the post processor files are machine specific I...
Nothing else is plugged into laptop. I'm on a Dell Laptop in the UK so PSU has 3 prongs on the DC side therefore unswappable. I will try...
Rite, unplugging the laptop with the controlls software breaks the circuit and enables normal operation. Only obvious issue is that I can't keep...
Did some of them but will do them systematically now and let you know.
Hmm, from what I can see my scenario is as such:- I’m using one probe, an Openbuilds XYZ touch plate. The plate has LEDs which normally...
Yes indeed I had read above and isolated the issue to the VFD. Once it is removed from the equation the touch plate is fine as it was before. The...
The issue appears to be with the VFD and by being connected to the spindle with a conductive body the earthed loop is permanently closed. Not sure...
Hello, I have just completed upgrading my spindle to a VFD water cooled one. But since doing that my touch probe is closing the circuit (led on)...
Yes indeed it was the flexible coupler rubbing. I had eliminated it before as a possible suspect since it would have been spinning at all levels...
Hmmm, will look at that. I didn’t suspect it before since the noise only comes when the gantry is towards the top of the c beam. Thanks for the...
