Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Peter, I have checked the whole mechanical system, collars, nuts but those are not the problem, in fact I have found a new match between offset...
What is the purpose of the colors in the software? pink, red and blue. I found that the problem have a relationship with these colors. The...
Thanks for reply. I have a question in that mechanism, when the plate is deformed and the separation is decreasing, the torch will touch the...
I need control the height for my plasma torch and the solution is a THC system, but how I can configure the blackbox for communicate the THC with...
The torch is in square correctly. I think that the problem is the current adjustment in each axis. Should be the same current in all motors with...
I've checking all the posibles errors in the mechanical system, and all is right. I saw the movements and the principal offset is when the both...
I have an offset problem with the X-axis when making my plasma cuts with almost any geometry which has intermittency in the geometry. As shown in...
This is the plasma torch
What is the difference between the working zero and the machine zero, since the working zero can be modified but the machine zero I can't find how.
It seems that we do have a retractable nozzle, but what we do not know is if it is being used, since we believe that the cables that are not...
Ready, now we have been able to run the home. Now our problem is that when trying to use soft limits, the work area is not the correct one with my...
These are the pictures of the motors, sensors and plasma control connector, however the plasma is not connected to the blackbox relay right now....
Is there specific documentation or videos on how to use the limit switch sensors?
What is blowback? In fact my plasma inversor is LF, but I think that it’s a lie. Yes, I have tried several cuts / movements in the air with the...
Yes, the second alarm is related with EMI because when plasma is off, that alarm don’t show up. It’s necessary isolate the sensors? And the...
I have already tried removing the V+ from the sensors but it seems that they are still working the same, they are activated by pressing and...
I have updated the firmware, I have changed the settings to a stock machine (LEAD 1515), the movement is logically different but the behavior of...
Cua What is the difference between hard limits and home limits? When the movement finds the sensor and presses it, the alarm is: ALARM: 1 -...
That's right, I have tested with all the displacement of my table that is 3m. The sensor starts pressed in position 0.00 and when the movement...
I have already placed the covers on the sensors and with the insulating rubber they have been placed on the structure. Unfortunately I keep...
