Separate names with a comma.
Some features disabled for guests. Register Today.
Maybe I didn't explain that very well, I meant a WiFi antenna that connects to a device via USB, like this. [ATTACH] Part of the reason I...
The ones I have are designed for USB-C to CAT-6A ethernet (X32 side I used a USB-C to USB-B adapter at the controller), these are not "extenders"...
will do! Any experience with configuring this to work or possibly a direction to look? I can obviously google but not sure the best terms to...
I was looking at the shielded versions of those as well as shielded 6a connectors, do you think that would still end in the same result? X32 is...
There is about 20' between my Mac and X32, obviously using USB that far away has caused some issues. Question is, has anyone used USB over...
I only need the brake when torque hold is not being applied, ie; when the system is off. The brake is wired so that it is disengaged anytime the...
I have a similar scenario to the OP. Currently using the NEMA 23 Stepper Motor - High Torque Series but need a brake for use on my Z-axis. I...
Anyone know what wire size to run for the OB LED light ring or what it's power requirements are?
Sounds like that’s gonna be the best option, figured I’d run it by the experts first. Thanks for your input. Matt
Wouldn’t that require coolant to be on while jogging, homing, probing, etc. with the Z-axis though?
I bought a 24V brake for my Z-axis stepper (datasheet attached for reference). The brake operates as N/C (engaged) without power and engages when...
I'm looking for some more consistent limit switches that would be compatible with the BBx32, currently using the OB Xtension switches. I need...
Thanks for the clarification. During this downtime I converted from wheels over to Hiwin type rails and guide blocks. Hopefully the combination...
I’ve eliminated the lead screw / bearing play with some Teflon tape so that’s not a problem. The radial play between the bearing and end plate is...
it’s a custom build but I’m referring to the OB c-beam end plates if that’s what you’re asking.
While diagnosing some noise and sporadic surface finish issues, I noticed that "all" of my lead screw bearings seem to have a loose enough fit in...
Didn’t even think about using continuous jog for that….♂️ and I have the OB xyz probe so I’ll give that a shot. Thanks again for the help guys...
Maybe I’m missing something on the jog commands via OB control, I find it tedious at times to swap back and forth between .1, 1, 10, 100 mm...
I have and use home limit switches, sometimes I need to move various axis small amounts for various reasons when it’s over the workpiece. As I...
So I have read the past posts I could find regarding the use of jog knobs on a CNC and the possibility of cooking drivers. That being said, I...
