Separate names with a comma.
Some features disabled for guests. Register Today.
Hi David - Many thanks for your response, it would be fantastic if you were able to add it to the post settings!
I have found with my plasma that I need ~ 10s delay before commencing the next cut, this is the length of time it takes for the airflow to stop...
Hi David - I swapped the relay out for a new one and then the problem got worse! I reviewed the settings on the plasma cutter and switched from 4T...
Has anyone tried a 5V SSR 1CH relay for switching the plasma torch? Interested if this is a better option than standard relay?
Occasionally the plasma torch does not turn off between cuts despite gCode having the correct M5 command line. this is an intermittent problem....
Hi Peter Fitted a new driver on the weekend and motion is perfect now thanks for helpful suggestions. I have also reduced the acceleration and...
Checked the continuity, and both coils wired and connected to the DM556 driver correctly, which makes sense as this axis worked fine until I...
GRBL Setting backup (Plasma cutter - 3 axis) $0=10 ; Step pulse time, microseconds $1=255 ; Step idle delay, milliseconds $2=0 ; Step pulse...
My stepper motor is having issues. I can jog it and it moves with occasional "jitter", but when I load gCode program the motor moves 1 step cw...
Hi Alex - thanks for response - I have post process correctly set per instructions via link you sent - I can see I am able to adjust the setting...
Hi David Thanks for response. I am using Fusion 360 to generate the code. 0.6 seems too short as the torch moved through a sequence before firing...
How do I determine the correct amount of time to wait for ARC to form before moving the torch? On my first run the torch fired after the sequence...
