Separate names with a comma.
Some features disabled for guests. Register Today.
Yes, it is possible... I have recently finished upgrading/ rebuilding a Creality CR-10S with new main board, TFT touch screen, new direct-drive...
A little bit more info would help -- what "CNC control box" are you using, and how do you have it wired? I use an Everlast PowerPlasma 82i and...
This table started out with the purchase of the famous (or infamous?) JD's Garage Budget Plasma Cutting Table plans. Once I studied the plans, I...
cnc-trucker published a new build: This is a story about a guy who started with a $25 set of plans, and through 4 iterations/ rebuilds, ended up...
The pin assignments for the Arduino are in the "sketch.ino" file -- they're pretty self-explanatory. John
[ATTACH] I'll do you one better than that -- check out my Git repository at GitHub - ccwtruck/LinuxCNC-4x4-PlasmaTable: Complete working...
LinuxCNC has come a long way; they are up to v2.9.2 now, and have introduced the QtPlasmaC module completely dedicated to plasma cutting. The...
:) LOL! It's one word -- sort of -- and it's a switched ground on the Arduino boards. Ground to one pin on your CNC connector, the other CNC...
David, it is funny that you mention the external ADC; I just completed a new THC sketch that uses the ADS1115 ADC instead of the on-board ADC....
Well, David, now that I have the trailer back up & running, I've had time to do some in-depth trouble-shooting on this issue. I built a Mega/...
No, not related at all, I think -- other than that when it starts the G2 arc movement, the torch voltage goes up because of the slow-down; I think...
You might want to know -- I ran into a problem with the THC; don't get me wrong, it works great on straight cuts -- but 5 times last night while...
Windvane, If you will go to the link in my post, you will find the updated files for this THC to run it along with GRBL as an interrupt-driven...
UPDATE: THE DIVE ISSUE I MENTIONED BELOW HAS BEEN CORRECTED. Jeramiah, in one of your posts in this forum topic, you stated that if anyone could...
Yes, I too had that exact problem on my table (which only started out as a JD's Garage build -- ended up a whole lot larger & more complicated.)...
