Separate names with a comma.
Some features disabled for guests. Register Today.
I will contact them as well and see if they can let me know some settings if they have a black box build, most of there documents and links point...
The motors were all purchased direct from the openbuilds store, power supply and x32 controller as well, all the cabling came from there as well....
The gcode was already loaded i tried to cut another one of what i had cut so just re Zeroed and clicked Run, something odd is going on. Is there...
Checked couplers ect they are all tight I'll adjust the z speed, the openbuilds software is really slow to react to anything I do now and I can't...
I just did a single cut and went to cut the same part again, did the normal re did X y z 0 and straight away it moved then plunges right down to...
Yep I am setting z 0 at material surface, not sure if z is slipping, how would I know?
and when it has moved over to the next cut it plunges right down to the last cuts end depth by the looks of it. Really confused now as the demo...
It did the same with a 3mm safe height
I'll try with smaller and see if that helps but it doesn't top out
here is the exported file )
I used the openbuilds control program to load the gcode and then the openbuilds control to do the cut ect
Sorry about all the questions i am very new to fusion 360 and also CNC machining
Here is the DFX file i made as a sketch in fusion 360 this is what i am trying to make for my van.
The yellow world runs fine I think, this is really starting to do my head in been at it for days now with the same results.
Here is a better picture on the 2nd hole it does not look like it is following the gcode instructions.
Thanks for the reply. I am getting another odd issue I have made a sketch in fusion 360 and also exported it as a dfx the cuts look good in...
HI all I have just tried my first cut on my stronghold pro but its not cutting as the image is on the screen it looks like it is mirrored or...