Separate names with a comma.
Some features disabled for guests. Register Today.
Yes - I also read cat5 was a poor choice for creating extended cables. Didn't know why though. Thanks.
Seems to be working better now after some tweaking. Thanks for the suggestions. I purchased a DS-55 Pro Plasma cutter with blowback start made by...
I kept reading about ways to extend USB cables and using cat6 extensions was a popular method. I thought the same as you regarding USB length...
Having switched from a high frequency pilot are plasma cutter to a blowback start cutter I noticed my cuts were not finishing. I realized this...
Update: it turned out the relay was not the source of interference. After a great deal of trial and error I discovered the computer I was using...
Hello, I'm hoping someone can give me some advice on a situation I've been having with an Arduino type card used to control my homemade CNC plasma...
Will do. Thanks.
Good advice. Wish I would have thought of that before buying a pilot arc machine since they are not all low frequency machines. I just got done...
I wonder if anyone could help me with my dilemma? I built a CNC Plasma table and control it with an MKS DLC32 V2.1 board (with built in Wi-Fi)...
Just wondering if there's any generic g-code files that I can use to run some test cuts on my homemade plasma cnc machine? Maybe something with a...
Perfect. Thanks!
Just wondering if anyone knows the answer to this. For some reason I thought Open Builds Control displayed the runtime of the job after it...
I believe you are correct about the resonance. Thanks for your input.
Not sure...[ATTACH]
Misterg - TB6600 drivers - dirt cheap.
The stepper motors were a mixed bag. The z-axis arrived with one already installed (very cheap for the whole thing at around $25) and the motor...
So I built this CNC machine and it sounds a bit squeaky and creaky to me. I've never built one before so I don't know what to expect. Are these...
In the same boat - tried to flash my control board with grblhal and lost the tab to grbl settings in Open Builds Control. Was looking to restore...
Like I said - I know little to nothing about grbl code or how to insert it or what to expect even if I could figure it out. Total newbie to all of...
I'm running an MKS DLC32 V2.1 board. It has dual Y axis ports. Seems pretty capable. I didn't order the display just the board and I'm setting up...
