Separate names with a comma.
Some features disabled for guests. Register Today.
Doesn't seem to matter which controller box I use, the issue remains the same. Have rewired everything follow the video, checked things with...
That is the 2nd controller they sent me. Plugged in the original one, and the red light is not on. Everything is wired correct, everything tight...
Noticed there's a red light on the z axis button on controller (x32) is this indicative of an issue? Photo attached
Hello, The lead 1515 struggle continues.. Gave up on being able to use the interface, and now the Z motor won't work. Just makes an awful sound...
Am in a device test mode on the interface now. Are the buttons on the interfaces notorious for not working most of the time? Some. It seems really...
Hello, Figured I'd try reaching out one last time before just accepting that I can't use an interface to control my lead 1515. Been at it for...
Yep! Only cable is the aux (rj12?) connecting the interface to blackbox
Hello, I recently put together my lead 1515, and ran into some problems with connecting the interface. I ended up receiving a replacement...
Thanks everyone. I reset the X axis direction in gerbl settings, and that solved it. I'll get it reassembled to the correct layout when I get a...
Yes, that definitely makes sense. Hoping that reversing the X axis in grbl control will make that workplace coordinate zero on the machine, the...
So does that mean it should be parking at the other end of the machine, back on the end where my 2 Y motors are located? Or does it park up front,...
Correct, homes to the front of the machine. I'll be back at my shop tomorrow and will try that setting reversal and keep you updated. Thanks!
Here's another picture of what's going on. The red is the X axis, blue is Y. When I stand in that position related to the machine, X positive...
When I stand in front of the machine, where it homes too, and do Y positive, X positive, and Z positive/negative, they move in the correct...
I also tried using the center datum in vcarves, and setting my zero point on the machine, on the center of the board. Still having the same issue....
Hello, I recently assembled my lead 1515, and am trying some test cuts. My project isn't starting in the right place, and not sure what the issue...