Separate names with a comma.
Some features disabled for guests. Register Today.
Yes,, previous attempts with same cable failed same. The wiggles works:)
haha - you wont belive my luck!. after researching and testing with no luck, i tried the 'wiggle the cable in the box' trick and it worked!!!...
Thanks for the explanation. I never gave it a moment's thought but it makes sense. So now if I actually did whack it the controller itself? Is the...
Just a regular hose, the shopvac was grounded. What's a anti static hose?
i had same issues while i was working out the issues on my grbl and cut settings. once i fixed all that it was fine. I installed a sweeper on my...
update, i found the bits i selected were not the right size for the process. when i changed to a 1/4 bit for rough and a 1/16 for detail, it...
i added a detail bit, created rough and detail gcode, opened the rough gcode in control. its not showing anything in the cut page. the detail...
I'm cutting a large image, its going to be 20inx20in. i setup my x and y settings and the image appears correct in openbuild control, but it...
Wonderful! this made good sense and it did exactly what i wanted, the location and cut depth was perfect. Now I understand these setting and how...
thanks again for your response. [ATTACH] i went back in to try your suggestion. on the z zero tab there are only 3 choices, the openbuilds xyz,...
I performed the home operation successfully. I moved the spindle to the left corner of the board. I lifted up to use the custom z probe. these are...
I must admit, I've never touched that Home setting. My assumption is the home is the machine home and the set zero for x, y and z are for the job...
thank you for this response. I didnt even notice I had to choose the probe type and you are correct i left the default openbuild probe, thats my...
I was eyeballing the Z settings - i would simply lower the spindle to just above the boards and set zero there. this was causing hard limit...
I think you guys helped me figure out the reason and solutions to this problem. I thought about what you said regarding the error messages and it...
thanks again. I've just ordered a dust extraction kit as wife is tired of sawdust everywhere... I'll oder the Xtension switches, do they come with...
. Do you have a VFD/spindle? I have a separate powerful router that I plug in separate from the CNC itself. I took your advice and suspended the...
tanks for the quick response! Your comment makes sense as it seems random although many of the errors do appear to hit at the exact same spots on...
I've had limited success with the help of this forum. I'm able to create simple images in Easel to my specifications, download the grbl, import...
