Separate names with a comma.
Some features disabled for guests. Register Today.
For the 24v side you would want DCV, can't see in the video where you were measuring 46V AC?
You can't feel 24v with dry skin, so check the output with a meter, the psu might be passing high voltage. Gary
You got zapped by 24v? better test the output of your power supply! Gary
Hi Jessica, Can be many things, for some background are you using the stock profile for the 1515? with a Blackbox controller? After the run is the...
is this a 220vac inverter or 120v? can you post your settings? some people are inverter wizards here and can look them over. Cheers Gary
could be inverter settings, what's the bit size and feed rate, cut depth, and material?
There is really no reason to get a BB for this use, you won't use the built in BB drivers. All you need is a simple Arduino Uno with pulse and...
Hi David, If you are doing something that requires 8+Amps and high voltage then you don't want a BB. The BB x32 is perfect for up to 4 amp motor...
There is really no need for two rails on each side of the Y axis, and this is one of the reasons. The C-beam faces are not coplaner. Hold a...
Did you look at Avid CNC?
For fun I opened in Estlcam, which handles complex (and maybe not the cleanest drawn, my fault) dxf better than other programs I've tried. [ATTACH]
Made sure your new PSU is set for 120vac mains? switch on the side
I've had this happen it was an intermittent connection on the stepper motor cable, broke 4 small bits before I realized what was going on. Gary
This is totally normal, if you disconnect the motor from the driver it will run smoother. Also some fear back voltage damaging the drivers so not...
Do you hear any stuttering or skipping? are you using the stock workbee profile? Cheers Gary
Optical should work fine as long as you keep them clean, I deal with them everyday in my day job, they don't like dust. Gary
Good choice, the spring loaded ant-backlash isn't suitable for cnc. Any reason you are sticking with nema17?
Pitch of 2 and 4 starts.. that's an 8mm lead also
EMI yes, I run my AC powered router through my chain but all my wire is shielded and drains earthed, no problems.
Hi Scott, how far off is it? sometimes the actual measurement of the bit is different than the listed diameter. Make sure you don't have any...
