Separate names with a comma.
Some features disabled for guests. Register Today.
vectric was zeroed on the bed. I don't know how that happened. I never choose the bed. It works now. Thank you.
No hardware or software changes. Working zero is going to the front, left with the z touching the top of the work piece.
no issues with z moves. This is an old working setup.
goto work zero sends it to the correct position on the material. running the code causes it to lift the z axis and start cutting air.
Blackbox 32 Openbuilds control R7 Vectric aspire for gcode I home the machine and set xyz to zero. I probe with the open builds probe. When I run...
I have replaced my tinyg with the blackbox32. I have it set up as a custom and it seems to be working. It will home. All of the switches are...
I have an R7 with the 800w water cooled spindle with a NowForever control box. I am currently using a TinyG controller. What do I need to be able...
I started looking at taking apart the z axis. I noticed the cable chain was not allowed to flex enough and was holding the z axis up. I...
There is some physical limitation that I can't see on both the upper and lower travel. I realize that I am almost at the physical limitation of...
R7-CNC/00 - R7 Documentation at master ยท eclsnowman/R7-CNC R7 250mm c-beam z axis. Soft limits are currently off. Zmax is 0. Zmin is -175. The z...
Changing the travel length did not help.
The spindle is currently set above the bottom plate which is about 12mm and the c-beam is 250mm. The travel is set to 0 and 120. I will set the...
SMW3D R7 Tinyg 8 fw 0.97 Chillipepper I can jog my z axis all of the way up. The bottom wheels are almost to the end of the c-beam. This looks...
Thank you. What is better, belt or screw drive?
I am thinking of building a cnc router. I need it to cut the shape and holes in .063 to .090 aluminum sheets. My project will be a tube amp...
