Separate names with a comma.
Some features disabled for guests. Register Today.
I will print it and try the mod. I don't want to lose all the unnecessary plastic around the frame of the printer, it makes the printer look like...
I posted the pics of my machine on the 4th tab of this thread. I also used the marlin file from the original poster, the only difference is that I...
I've already got mine working with Marlin/RAMPS. How are you planning to attach a different hotend onto this thing??? I'm sick of the filament...
Yes, if you install a reprap/ramps board it supports dual extruders.
My Cube 3 (1.14b) printer automatically centers the print bed, no need to push the bed back, weird that you have to. I just need to adjust my...
The chip switch is definitely right side cartridge only. As soon as it sees the left cartridge it will cancel the print. I even inserted the left...
I can't 100% verify that will work. It looks like it is missing a connection from the black wire to the printer or his switch, it may be explained...
For the chip switcher, I ran wire directly to the printer connectors with a good chip connected to the wires, I then inserted a 0% cartridge into...
If I understand your question correctly, the answer is yes. That is an ABS print from an un modified stock Cube3 printer running firmware 1.14b...
Bolsoncerrado, I think you can still do better with your prints, check to make sure your bed height before printing is just high enough that a...
The chips are just glued in place, they pop off with a little elbow grease.
Yeah my prints are centered. I can upload some pics of the stuff I've printed. Printing in ABS is a nightmare, but PLA comes out amazing. My only...
Well I own 2 Cube 3D printers. One was at 1.12 firmware, the other is at 1.14b. When I put the 1.14b firmware on a thumbdrive, the printer that...
I'm running a MKS with Ramps 1.4 A Rumba board would definitely work too, and the original poster has provided his Marlin file to run it. The...
The fan above the hot end won't spin with less than 24v applied to it. The Cube comes with a 24v psu, so the obvious choice for me was to use it....
I would've did the test calibration print last night, but I had to leave out. I have some running around to do right now, but I will do a test...
I'm not sure, I bought the MKS because it was the cheapest. $39 for board and screen. My train of thought was to not spend too much on this...
The USB swap trick will work as long as you aren't already at 1.14b As long as the printer can't connect to 3dsystems you are good, so yes...
I blocked 3D systems in my router's firewall settings, and then I used Cubify 3.13 for my prints with the chip switch. It worked on all firmwares...
I bought 6 endstops and was going to install them, but decided not to. I will just manually set the home position. Maybe later I will install the...
