Separate names with a comma.
Some features disabled for guests. Register Today.
need some help on the hardware / software department maybe see if the black box would be up to the task . im working on an idea to automate a jig...
i have some model and redesign of the parts on my thingiverse account . here is a link u can see in the pic what im talking about Acro system y...
you should not have any problem they have wheels top and bottom of the v-slot clamping on to it .
depending on how u mount you would need to have what ever axles to go to a home spot at the bottom of the frame b/c when the power going to the...
I have some modified Stls on Thingiverse just look for the group acro system
i would thank u could swap out the laser for a 12v solenoid to move the pen up and down when writing. pretty much how a vinyl cutter works . btw...
of course . but if all your doing is laser its way over kill
yes just make sure its v-slot . i ran 2040 on all mine but used t-slot for the 2020 would go . here is a pic of mine so far been making a few...
as far as the engraver motor i would look at the power supply that would tell u the voltage
3d printer u should be ok . does the cnc pro have inouts for the heater on the hot end ? the engraver not to sure about i have a few parts in...
most cases u have to make multiple passes to cut your material so the focal point changes very or very other pass
my bad 2m is the pitch :banghead:
shouldn't the pulleys be 5mm bores not 2mm
could u not make that a home position for it to return to after running that way there is no problem of falling when the controller kills power to...
there is also a full set of plates on thingverse in both .stl and .dxf
