Separate names with a comma.
Some features disabled for guests. Register Today.
I have had exactly the same problem. I have a xPRO CNC v3 and I usually use bcnc. Sometimes it just does not want to probe downwards. Sometimes it...
I use a xPRO CNC V3 board which has: 10k pullup -> 1k-0.1uF low pass filter -> 74HC7541 Schmitt trigger -> Arduino It is all in their schematics...
I don’t think there is a way to resume after triggering a hard limit. GRBL stops the motors immediately after the limit is triggered to mimize...
Earlier in this thread it has been said that you should leave out the shims on in the X and Y axes to make them line up correctly. You should...
Okey, I have had some serial communication issues with my xPRO v3 (corrupted gcode lines I think) but I’ll see if I can figure it out.
Does anyone know why the recommended Grbl settings on the Build tab has: $10=2 (status report mask:00000010) ? The default and recommended value...
I added the ”sponge mod” and it seems to wipe the lead screws very clean. The MakerSL Customized OB Minimill
I just read up on bCNC. It looks like it has all sorts of features, pretty much everything I had hoped for and more :) Here is a workflow for...
Cool I will try to widen my cut a little. With the settings I tried previously it would have taken 11 hours to make my cut... :)
What sort of depths and widths of cut would you recommend for cutting aluminium? I have the feeds and speed sorted with G-Wizard but I feel like...
I myself made the mistake of buying the first cheap Chinese end mills I could find. Later I read up on speeds and feeds and learned that the 4...
I’m just getting started with my MiniMill. I would also recommend Fusion 360 as a CAM-software for mechanical parts. It can be used as CAD as well...
Are you sure it is not a software / settings issue? If you have homing enabled, you can’t jog before you have homed the machine. If you have hard...
My 6 pin XLR connectors are rated 7.5A per contact which should be more than good enough. They are frequently used for large speakers as well...
I used XLR connectors, those things that are used in Microphones and other sound equipment. You can buy those with different amount of pins and...
I have had a few issues with your Xlarge gantry plates. I received 2 plates with a MiniMill kit. One of them was fine. The other had triangular...
