Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

1510 work bee

Discussion in 'CNC Mills/Routers' started by Chadfarmer, Feb 25, 2019.

  1. Chadfarmer

    Chadfarmer New
    Builder

    Joined:
    Feb 13, 2019
    Messages:
    99
    Likes Received:
    1
    can I use something to replace the wheels total 47 im 100 part and the wheels don't work 1 week trying to adjust taking apart 10 times most of all my screws ends are worn out from loosing and tighting them. im very frustrated with design
     
    #1 Chadfarmer, Feb 25, 2019
  2. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    #2 sharmstr, Feb 25, 2019
  3. Chadfarmer

    Chadfarmer New
    Builder

    Joined:
    Feb 13, 2019
    Messages:
    99
    Likes Received:
    1
    Is there a kit to buy thrm?
     
    #3 Chadfarmer, Feb 25, 2019
  4. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Look at Jacobs parts list. Its custom but easy to do.
     
    #4 sharmstr, Feb 25, 2019
  5. Chadfarmer

    Chadfarmer New
    Builder

    Joined:
    Feb 13, 2019
    Messages:
    99
    Likes Received:
    1
    How do i contact these guys. I would rather pay them to do it right. Im so frustrated with this i took 100% apart.
     
    #5 Chadfarmer, Feb 25, 2019
  6. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    What guys?
     
    #6 sharmstr, Feb 25, 2019
  7. Chadfarmer

    Chadfarmer New
    Builder

    Joined:
    Feb 13, 2019
    Messages:
    99
    Likes Received:
    1
    Sharmstr did replace your wheels?

    I sent a message to jacob
     
    #7 Chadfarmer, Feb 25, 2019
  8. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Yes. I posted the link above.
     
    #8 sharmstr, Feb 25, 2019
  9. Chadfarmer

    Chadfarmer New
    Builder

    Joined:
    Feb 13, 2019
    Messages:
    99
    Likes Received:
    1
    ok so u did the same I contacted one of the guys and hopefully he can hook me up sharmstr thanks for the help I really appreciate it
     
    #9 Chadfarmer, Feb 25, 2019
  10. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Yes. I used his drawings to make the blocks that tie in the bearings to the Y axis plates.
     
    #10 sharmstr, Feb 25, 2019
  11. Chadfarmer

    Chadfarmer New
    Builder

    Joined:
    Feb 13, 2019
    Messages:
    99
    Likes Received:
    1
    Wish i had the tools to do that. But i dont hopefully the guy can put me together a kit.
     
    #11 Chadfarmer, Feb 25, 2019

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice