Welcome to Our Community

Some features disabled for guests. Register Today.

3 Axis or 4 Axis CNC Lathe?

Discussion in 'General Talk' started by Awestruck, Jun 12, 2023.

  1. Awestruck

    Awestruck New
    Builder

    Joined:
    Dec 17, 2017
    Messages:
    76
    Likes Received:
    13
    Hi -

    Recently I got to thinking about making some large urn type pots and wondering how I could do this with CNC. I've attached a picture of something representative. This pot could be 26 to 28" tall, maybe 20" in diameter.

    I wondered first about slicing a model horizontally and carefully card on my more traditional desktop 3 axis cnc router. Then looking at the complexity and alignment and under cuts, I turned to thinking about the lathe. ;-)

    So I don't have much experience with a CNC lathe. I find myself first wondering, if this is a realisitic idea. It would need a bit of build volume, but seems doable. Next I was wondering if it would be fine for three axis or if I really should be building 4th. Would be nice for just three, seems like an easier and less expensive build.

    The lathe would need a long bit, say 6 to 8 inches, to be able to work from the outer more diameter to the inner most without being hung up by the shape. It would need up/down, and side to side and rotate. Would it benefit from having back and forth too? The router head I'd need to keep slim, so maybe more like a palm router or really tight spindle of some sort.

    Once carved on the lathe I'd have to do some jig to hollow out the pot part.

    What do you think? A good project? Or not the right tool for the job? I may be need something like 10 of these, thus I was thinking a machine may be great, allowing me to reproduce units, maybe even sell locally units locally the design works well.

    I could use something like Foam Coat to harden it. There are similar products, I'd have to research which on may be best. A variation on this would be once one foam is made, to make some larger mold using the foam as the model to mold around, then I could cast these in concrete.

    I'm grateful for any thoughts or advice on making these.

    Even yet another idea that strikes me, maybe I make a large model somehow, starting with a 2d profile template I could make on my existing desktop cnc router or shaper, then building up some how the more intricate details to make the unit that I would then make a mold out of.

    6833-6601-alberobello-urnl-S1-terra-cotta-planter-pacifica-antico-terra-cotta.jpg
     
  2. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,015
    Likes Received:
    1,682
    This is how i did it and using V carve and the post processor I use, you can care asymptomatic objects like busts and figures.

    LEAD Lathe
     
  3. Awestruck

    Awestruck New
    Builder

    Joined:
    Dec 17, 2017
    Messages:
    76
    Likes Received:
    13
    Thank you @Giarc , Your build has been super inspiring to how I want to accomplish my build. May need to adjust dimensions, but I was thinking three axis may be enough. Very nice!
     
    Giarc likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice