I Thought i would share my 3D Printable Designs for : Arduino Mega 2560 Cases that i made for my CNC Router. They are Designed so no supports are needed while printing. Hope Some People find them Useful. The First Design is a Standard Type Mega 2560 Case - The Other was Designed to be mounted with Bolts or Screws in a CNC Controller's Enclosure thats Running GRBL Firmware. Both Boxes have the option of fitting a Printed Reset Button, You May find the Reset button sticks down when you screw the case Base & Lid together. This Only Happens if your 3D Printer's Extrusion is a little bit over Extruding - But the fix is Very simple just Sand 0.2 mm off the bottom of the button I Found on one of my printers it was perfect & on the Other Printer it was an issue - But that was the one that was over extruding Both have been Printed Twice & Tested, I Use one in side my CNC Router Controller case. Kind Regards - EXWHYZEE [/IMG]
I just got my new Mega and Screw board in the post!! I'll make a note of this post, take a copy of the prints and get a friend to knock me out one. Nice one
Hope you Find them Useful GrayUK Please Note Both of the Case's are designed for people who Use Standard I/O Header Pins with Wires Soldered & Sleeved - They are not designed for Shields to be plugged in ! Kind Regards
