Welcome to Our Community

Some features disabled for guests. Register Today.

Based on 608 tube Plasma Cutter

Discussion in 'Laser Cutters' started by carlos515, Feb 17, 2020.

  1. carlos515

    carlos515 New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    7
    Likes Received:
    10
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,942
    Likes Received:
    4,295
    Lovely remix of my old design (openhardwarecoza was my profile before I joined OB hehe!)
    Love the water table!

    Keep us posted - would love more pics and videos when it is in action.

    Sadly years ago I had to abandon that build when the guy I was building it with got into some family strife and it never got finished, so this is bitter sweet :)
     
    Giarc likes this.
  3. carlos515

    carlos515 New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    7
    Likes Received:
    10
    Thanks Peter ,
    Your original design is very good. In building the table I keep coming across different ideas to implement in the table. More pics and material lists will be added in the future.
     
  4. LoCo DIYer

    Builder

    Joined:
    Feb 7, 2020
    Messages:
    5
    Likes Received:
    3
    Looking great! Can't wait to see how this turns out for you. If you end up being happy with it, i would like to build one myself. Best of luck on your build and keep adding updates!! Would love to see more pictures as you progress.

    Cheers!
     
  5. LoCo DIYer

    Builder

    Joined:
    Feb 7, 2020
    Messages:
    5
    Likes Received:
    3
    I do have just one question, what is the working/cutting size of your table?
    Thanks
     
  6. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,942
    Likes Received:
    4,295
    With that design it should scale well to any sane size - just adapt the steel lengths accordingly, add extra bracing as needed
     
    LoCo DIYer likes this.
  7. carlos515

    carlos515 New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    7
    Likes Received:
    10
    Well I finaly got around to setting up the table. I have the basics set up to move all the axis .I will work on the Proma THC next. The brains of the table is a PoKeys57E . Running on Mach3.
     
  8. carlos515

    carlos515 New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    7
    Likes Received:
    10
    The cutting , working size of the table is 4' x4' .
     
  9. carlos515

    carlos515 New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    7
    Likes Received:
    10
    Well after a break , I am back at the table. I have decided to use gear rails for my x and y axis .
     
    Peter Van Der Walt likes this.
  10. carlos515

    carlos515 New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    7
    Likes Received:
    10
    I am working on a floating z axis with ohmic touch off.
     
  11. carlos515

    carlos515 New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    7
    Likes Received:
    10
    I have switched from Mach 4 to LinuxCNC. I have recieved my Messa 7i76e and my THCAD boards. I was having problems with the hardware in Mach 4. I will set up the new system shortly and take it for a test drive.
    I also have a robot3t ohmic sensor arriving , hopefully , soon.
     
    Peter Van Der Walt likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice