I know some others have done this, but I wanted to see if anyone had feedback. I am in the process of building a CNC Plasma Cutter Table, using a lot of parts from OB including Black Box. I plan to use the Hale Design Torch Height Controller though. I had some feedback in a CNC group on FB that I may be disappointed if using the BlackBox for a CNC Plasma controller and wanted to see if others had some feedback on how they have liked it, or any issues that may have arisen as I get into it. Thanks all!
Checkout the following videos (BlackBox powered plasmas) Also see Openbuilds CAM: Initial Height Sensing setup help needed for some details on how to do touch-off in OpenBuildsCAM Checkout docs:blackbox:connect-plasma [OpenBuilds Documentation] for wiring details Most importantly - make sure you get a LF/BlowBack Plasma like the Cut50L, or the Hynade https://www.amazon.com/Digital-Non-Touch-Cutting-Machine-Control/dp/B09JZW9VJ3?crid=YZ8A7JT49G6T&keywords=hynade+cut60dn&qid=1653073773&s=hi&sprefix=hynade+cut60dn,tools,184&sr=1-4&th=1&linkCode=sl1&tag=mikefestiva-20&linkId=4bd816ba48a6cb5cfb9b150b6c877c39&language=en_US&ref_=as_li_ss_tl
