Hi, I'm Alex this is my first time on this site and need help. I'm building a grizzly g0704 mill to cnc I have all the mechanical stuff covered and purchased the stepper motors 2 are nema 23 5amp 570oz 1 is nema 34 6amp. 1200oz I need help from someone who know exactly what i need for the electronics, I would greatly appreciate a list of the controller I need the drivers and power supply etc and basically everything to get this running. I own Mach 3. And vectric And a few arduino boards and lt298 drivers and g sheild from my other machine a wood cnc router, I guess I dont have a preference on if it's run parallel or USB like my other machine but USB would be easier but just wasn't sure if I can find a driver for that amp for the arduino. But look forward to hearing back Hope to see a list I can just buy the stuff. Thanks Alex
【USA Ship, No Tax】3Axis 3D CNC DQ860MA Stepper Driver,80VDC/7.8A,256 Microstep | eBay I bought a DQ540MA +425oz(3A) motors drivers from here and got them within 3 or 4 days ,the seller Gladly corrected when i chose wrong order so i would get no taxes shipping ,he also gave me dual shaft motors instead of normal motors which he didnt have on supply for no extra charge(altho i will have to change couplers they have the 8mm shaft instead of 1/4" on the front) Also you get a breakout board with this but you will need MACH 3 and a pararell port to run them with it. Personaly i'd find a controller board with USB instead of Pararel port(is much slower and can couse stalls) or ethernet port. I will buy thisone: PoKeys57CNC - Polabs I dont know it much but a friend suggested it and its made in my country(if anyone knows it and has any feedback let me know) but there are other out there aswell.
