Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Homing

Discussion in 'General Electronics' started by Joseph Fitzmaurice, Apr 17, 2022.

  1. Joseph Fitzmaurice

    Joseph Fitzmaurice New
    Builder

    Joined:
    Jun 14, 2020
    Messages:
    29
    Likes Received:
    8
    Hi all having trouble with homing my 1515 with blackbox controller
    It starts to home z first which is fine but it keeps going and I have to hit the stop button.
    But the switch works when I move up the z manually any help would be great thanks
     
    #1 Joseph Fitzmaurice, Apr 17, 2022
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,193
    Likes Received:
    4,346
    Use the Troubleshooting tab in CONTROL to test your switches. Press the switches by hand, make sure CONTROL shows that Grbl sees them trigger, and also: make sure the correct axis triggers (if you accidentally plugged the Z switch into X for example)
     
    #2 Peter Van Der Walt, Apr 17, 2022
  3. Joseph Fitzmaurice

    Joseph Fitzmaurice New
    Builder

    Joined:
    Jun 14, 2020
    Messages:
    29
    Likes Received:
    8
    There all work by hand and are in correct
    It used to work fine thanks for you quick response
     
    #3 Joseph Fitzmaurice, Apr 17, 2022
  4. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,193
    Likes Received:
    4,346
    If they work in testing, they will work in Homing too. Inspect the switch during homing, make sure the switch is depressed correctly, if not adjust the switch position or angle
     
    #4 Peter Van Der Walt, Apr 17, 2022
  5. Joseph Fitzmaurice

    Joseph Fitzmaurice New
    Builder

    Joined:
    Jun 14, 2020
    Messages:
    29
    Likes Received:
    8
    Sorry Peter I double checked the and I had the z plugged into the y sorry about that joe
    Every day is a school day
     
    #5 Joseph Fitzmaurice, Apr 17, 2022
    Peter Van Der Walt likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice