Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

INTERFACE CNC Touch Controller

Discussion in 'Other Builds' started by OpenBuilds, Dec 15, 2020.

INTERFACE CNC Touch Control System

INTERFACE CNC Touch Control System

Discussion in 'Other Builds' started by OpenBuilds, Dec 15, 2020.

Super cool standalone Human-Machine Interface for controlling your CNC machines!

interface pendant game BlackBox Controller driver ecosystem powerful cnc
Page 12 of 13
  1. Tyler Skelton

    Tyler Skelton New
    Builder

    Joined:
    Feb 16, 2023
    Messages:
    9
    Likes Received:
    2
    I believe this is my current problem, went through Wi-Fi set up but never could connect after reboot. When I tried to repeat the process, get stuck at 2.3 Configure Wi-Fi using the web interface
    because http://192.168.0.41 is "unreachable"

    Id like to follow the step instructions you have given above but im afraid my computer competence is too low...As in, I dont understand step 1 (Download ESPtool (attached) and extract the zip somewhere you can reach from command prompt)
     

    Attached Files:

    #331 Tyler Skelton, Feb 28, 2023
  2. Trevor Farnum

    Trevor Farnum New
    Builder

    Joined:
    Feb 15, 2017
    Messages:
    57
    Likes Received:
    10
    I realize the previous page spoke about long-file names; my question is about short file names. I thought I would outsmart Interface by just labeling my parts A.gcode, B.gcode, C.gcode. Moving these files onto the USB stick they appear as AXXXX~X GCO, XXXXX being garbage text. Why does Interface throw in garbage characters to fill the 8 characters? It's totally random too. File names list out as A.gcode = A3F7F~1 GCO, B.gcode = B2726~1 GCO, C.gcode = CF45F~1 GCO (usually it cuts off the gcode extension).

    I have 30 machine files now and it's getting hard to sort through them as it also doesn't exactly sort by file name.
     

    Attached Files:

    #332 Trevor Farnum, Mar 1, 2023
    Last edited: Mar 2, 2023
  3. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,455
    Likes Received:
    1,915
    this is happening because you are using long filenames
    a short filename (to Windows) is a maximum of
    12345678.123
    since your filenames have .gcode extenstions (5 chars instead of 3), they are considered long filenames and WINDOWS, not the Interface, generates random short filenames for them.

    solution, just rename to "A.nc" etc and the short names will match the names you set.
     
    #333 David the swarfer, Mar 2, 2023
    Last edited: Mar 2, 2023
    Giarc likes this.
  4. Svechnikov Workshop

    Svechnikov Workshop New
    Builder

    Joined:
    Mar 25, 2023
    Messages:
    15
    Likes Received:
    10
    Hello. I am considering buying BlackBox and Interface. Is it possible to use the Interface to make a step of 0.01 mm by pressing the direction key once? Does the interface have a mode of continuous movement and movement by a given step? Thanks!
     
    #334 Svechnikov Workshop, Mar 25, 2023
  5. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    Interface is Continous jogging only. For accurate stock origin setup, checkout docs.openbuilds.com/xyzprobe
     
    #335 Peter Van Der Walt, Mar 25, 2023
    Svechnikov Workshop likes this.
  6. Svechnikov Workshop

    Svechnikov Workshop New
    Builder

    Joined:
    Mar 25, 2023
    Messages:
    15
    Likes Received:
    10
    Thank you for fast reply. Unfortunately this doesn't work for me. My projects start strictly from the center. Is it possible that in the future this feature will be implemented with the next firmware?
     
    #336 Svechnikov Workshop, Mar 25, 2023
  7. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    Not likely no.

    But you could consider a small change in CAD or CAM workflow. Origin off front left corner, move drawing by entering accurate measurements in CAD/CAM to where the stock center is.
     
    #337 Peter Van Der Walt, Mar 25, 2023
  8. Antonyart

    Antonyart New
    Builder

    Joined:
    Apr 16, 2023
    Messages:
    1
    Likes Received:
    1
    Hi... New here to Openbuilds...
    Just bought the Interface thinking it can Jog in absolute steps as i am in need of this too... (just to note... I have the probe plus) everything is great but sometimes you need precision of jogging 0.1mm and 0.01mm example when trying to center 4th axis or stocks that are not in square shape...

    + One for the jogging by steps/mm.... If its not going to be implemented, is there a way i can make some shortcut with a macro to move each axis 0,1mm & 0,01mm at least to correct the continuous jogging move?
     
    #338 Antonyart, Apr 25, 2023
    Svechnikov Workshop likes this.
  9. Svechnikov Workshop

    Svechnikov Workshop New
    Builder

    Joined:
    Mar 25, 2023
    Messages:
    15
    Likes Received:
    10
    This option will greatly increase the appeal for purchasing a complete set of equipment. A matter of pure development. With best regards
     
    #339 Svechnikov Workshop, Apr 25, 2023
  10. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    Still unlikely to be implemented. Fine-distance jogging to setup jobs is not very typical.
    To locate 4th axes, use Machine Coordinate macros / gcode headers (it should always be in the same spot on the machine for XY, Z centerline height will always be the same so CAM off center instead of outside diameter)
    Edit your Post to set Origin based as G10 offsets from Home (MPOS)

    For other uses, CAM up with bottom-left corner as origin (even "center" stock pieces - just measure the stock and CAM up accordingly) and use the XYZ probe: https://docs.openbuilds.com/xyzprobe

    These make things EASIER :)
    Nobody jogging in zeroes in 0.1mm increments - theres way faster and more accurate ways - just needs a little rethinking :)
     
    #340 Peter Van Der Walt, Apr 25, 2023
  11. Svechnikov Workshop

    Svechnikov Workshop New
    Builder

    Joined:
    Mar 25, 2023
    Messages:
    15
    Likes Received:
    10
    I understand. It just allows to cover different techniques and expand your strategy-building possibilities
     
    #341 Svechnikov Workshop, Apr 25, 2023
  12. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    You 100% get it! :thumbsup::thumbsup::thumbsup::thumbsup::thumbsup:
    More automated setups are a game changer
     
    #342 Peter Van Der Walt, Apr 25, 2023
  13. Evilspawn

    Evilspawn New
    Builder

    Joined:
    May 4, 2022
    Messages:
    34
    Likes Received:
    7
    I have the OB Interface, but coming from using Haas controllers, I would prefer an interface with physical buttons, is it possible to connect another style interface to the Blackbox?
    Second question, if I stay with the OB Interface, is there a way to simply tell the machine where it is in space (e.g. while setting zero I use a block of a known height) instead of only having the option to set the current location to zero?
     
    #343 Evilspawn, May 21, 2023
  14. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    If you like a more full featured UI, that would be a PC running CONTROL (see OpenBuilds Software: OpenBuilds CONTROL and OpenBuilds CAM )

    Slight change in workflow (start CAMing and setting origins using a XYZ Probe instead of blocks and manual position entries) etc will greatly ease your experience
     
    #344 Peter Van Der Walt, May 21, 2023
  15. Evilspawn

    Evilspawn New
    Builder

    Joined:
    May 4, 2022
    Messages:
    34
    Likes Received:
    7

    On pieces where I use the material surface as my Z-Zero, I generally do use the OB XYZ probe, but if I'm setting my z-zero from the spoil board I'm not able to do that, unless there's something I'm missing?
     
    #345 Evilspawn, May 22, 2023
  16. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    Flip probe upside down, place on spoil board, probe Z only :)
     
    #346 Peter Van Der Walt, May 22, 2023
    Alex Chambers and Evilspawn like this.
  17. Evilspawn

    Evilspawn New
    Builder

    Joined:
    May 4, 2022
    Messages:
    34
    Likes Received:
    7
    I have no idea why such a simple solution completely evaded me LOL. Thank you so much!
     
    #347 Evilspawn, May 23, 2023
    Peter Van Der Walt likes this.
  18. Rob G.

    Rob G. New
    Builder

    Joined:
    Apr 4, 2023
    Messages:
    4
    Likes Received:
    0
    I am working on finishing the build on my new diy cnc. I have chosen to use a Centroid Acorn for my control board. I was considering using this interface as a remote pendant controller. Can anyone tell me if this will work with my Acorn. This is all still pretty new to me and not having my machine up and running yet does not help.
    Thanks for any I put.
     
    #348 Rob G., Jun 18, 2023
  19. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    Check if it runs standard grbl/grblHAL and most importantly has a UART: docs:interface:connect-generic [OpenBuilds Documentation]
     
    #349 Peter Van Der Walt, Jun 18, 2023
  20. Rob G.

    Rob G. New
    Builder

    Joined:
    Apr 4, 2023
    Messages:
    4
    Likes Received:
    0
    Peter,
    Thanks for responding. Any idea where I might find this information? I do not see anything in the literature.
    Thanks for the help.
     
    #350 Rob G., Jun 18, 2023
  21. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    Could check with the manufacturer. Otherwise grab an X32 for proven compatibility (see https://docs.openbuilds.com/blackbox-x32 )
     
    #351 Peter Van Der Walt, Jun 19, 2023
  22. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,455
    Likes Received:
    1,915
    #352 David the swarfer, Jun 19, 2023
    Peter Van Der Walt likes this.
  23. Rob G.

    Rob G. New
    Builder

    Joined:
    Apr 4, 2023
    Messages:
    4
    Likes Received:
    0
    David,
    Thanks for the input and help. I like the openbuilds unit features and price. To bad it will not work.
    Thanks again for the help.
     
    #353 Rob G., Jun 19, 2023
  24. Peter Sesselmann

    Peter Sesselmann New
    Builder

    Joined:
    Oct 21, 2020
    Messages:
    21
    Likes Received:
    2
    Has anyone tried a WIFI USB stick? I believe you can transfer files to it from your computer...
     
    #354 Peter Sesselmann, Oct 10, 2023
  25. Peter Sesselmann

    Peter Sesselmann New
    Builder

    Joined:
    Oct 21, 2020
    Messages:
    21
    Likes Received:
    2
    How can I tell which version of the "BlackBox" I have? and does it matter?
     
    #355 Peter Sesselmann, Oct 10, 2023
  26. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    #356 Peter Van Der Walt, Oct 10, 2023
  27. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    Why the extra expense? Interface has that built in. Refer to the documentation please docs:interface:wifi-upload [OpenBuilds Documentation]
     
    #357 Peter Van Der Walt, Oct 11, 2023
    Peter Sesselmann likes this.
  28. Peter Sesselmann

    Peter Sesselmann New
    Builder

    Joined:
    Oct 21, 2020
    Messages:
    21
    Likes Received:
    2
    #358 Peter Sesselmann, Oct 11, 2023
  29. sportsracer

    sportsracer New
    Builder

    Joined:
    Nov 11, 2014
    Messages:
    4
    Likes Received:
    2
    Can't get the interface to work. Have the same screen that was posted about 4 pages ago.

    Blackbox 4 is powered from my power supply. No USB connection. Get the screen shown in the attached image.

    Interface WIFI is available and I'm connected to it but "Couldn't open page because the server stopped responding" (http://192.168.4.1). This is with Safari and Chrome.

    Firmware is 1.57.

    WIFI light is flashing. Should the AUX light be on?


    Any ideas?
     

    Attached Files:

    #359 sportsracer, Jan 6, 2024
  30. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,047
    Likes Received:
    4,313
    1) which lights are on on the Blackbox (picture will do)
    2) check cable between BlackBox and Interface
    3) as you mention its a BlackBox 4X, an older one? Did you follow "all" the setup steps in docs.openbuilds.com/interface (some older 4Xs has additional prep steps)
     
    #360 Peter Van Der Walt, Jan 6, 2024
Page 12 of 13

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice