Issue with CNC xPro v3

Hello everyone, I've been trying to make my cnc work over the past few days and I got to the point where I was able to jog the machine in grbl. So at that point everything was working and I decided to mess with the grbl settings to see if I can customize them to fit my machine the best. So, I tinkered with that and affixed my router to the cnc and suddenly none of my steppers wanted to turn. I thought this was due to the current being too low for each one so I turned them up. This still didn't solve my problem. I then turned to my grbl settings. No matter what I changed I could not get it to work again.

Fast forward to this morning, the cnc xPro v3 does not even power the steppers anymore. I have not done anything since the previous night yet now it just doesn't want to power my steppers. I get the led lights that tell me that the board is receiving power from my power supply and from the usb port. I also tried to turn the current for each stepper to the minimum and still nothing is even powered by the board, any ideas on what happened? I attached a picture of my board and my grbl settings if that helps. The grbl settings likely make no sense anymore because I have been trying everything I possibly can so those probably won't be an indicator of anything but I figured I'd include them anyways. Thanks in advance!

Also, before anyone asks I am confident that my wiring is correct despite the presence of only 2 colors of wire haha! I had the machine jogging and moving in all the correct directions before I started tinkering with settings and attaching my router.

 

Thanks! That worked! Now I just have a problem setting up my limit switches. I keep trying to home the machine and it moves like 10 mm down on the z axis then grbl tells me to "check homing switches" or something along those lines. Also i tried jogging the machine and then pressing the switches myself as the cnc is moving, still nothing. Any ideas?