hi im spending my cash on the cnc im not putting my good pc in the shed with the cnc so ill have to buy a second had pc laptop to run it what specs do you recommend min spec to run
System requirements for Autodesk Fusion 360 | Fusion 360 | Autodesk Knowledge Network If it can run Fusion it can run the rest, its about the most resource intensive CAM around.
thanks m8 but it just need to run the g code and cnc ill be doing all designing and encoding on the indoor pc so it will be an off line pc to run cnc and nothing more
Regardless, thats a good set of specs which covers the needs of Grbl hosts with 3D viewers etc as well. Its pretty sane. And trust me (; nothing worse than having to walk back inside for a quick reCAM while you sit by the machine... You'll run a copy of your CAM on there sooner or later If you really just want to run the machine, get an Interface:
i saw a youtube video with a guy plugging and unplugging the interface to get his usb working and i do have a rep of having bad luck in fact id go as far to say if i did not have bad luck i would not have any luck at all and the comments below the video are suspect and its going to be 250GBP time i import and pay tax
First batch issues, long since resolved. Factory just fitted incorrect USB ports. All the bad ones was replaced. Read the replies in those comments threads - they do mention the swop outs and great customer service too
