Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

new issue with interface

Discussion in 'Interfaces' started by Makoto cameron, Apr 25, 2021.

  1. Makoto cameron

    Makoto cameron New
    Builder

    Joined:
    Nov 11, 2020
    Messages:
    29
    Likes Received:
    8
    Aloha
    just came across a new issue with the interface.
    boots up ok, finds wifi and connected usb
    firmware is up to date 1.47
    GRBL no connecting
    checked all involved wiring-ok
    flashed blackbox- ok
    reset interface- same issue

    hardware
    lead 1015 w/laser
    blackbox
    openbuilds power supply
    openbuilds interface
     
    #1 Makoto cameron, Apr 25, 2021
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,190
    Likes Received:
    4,346
    Remembered to unplug usb cable from BlackBox?

    if its not that, check pins on connectors on cable between interface and blackbox for damage, or pulled out of connector slightly (reseat them properly)
     
    #2 Peter Van Der Walt, Apr 25, 2021
  3. Makoto cameron

    Makoto cameron New
    Builder

    Joined:
    Nov 11, 2020
    Messages:
    29
    Likes Received:
    8
    Thank you Peter
    Ill play with the wires
     
    #3 Makoto cameron, Apr 26, 2021
  4. Makoto cameron

    Makoto cameron New
    Builder

    Joined:
    Nov 11, 2020
    Messages:
    29
    Likes Received:
    8
    it was the wiring, thanks again Peter
     
    #4 Makoto cameron, Apr 27, 2021
    Peter Van Der Walt and sharmstr like this.
  5. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,190
    Likes Received:
    4,346
    Tie it off with a cable tie through the provided strain relief slots in the back panel to prevent some wear and tear :)
     
    #5 Peter Van Der Walt, Apr 27, 2021
    sharmstr likes this.
  6. Makoto cameron

    Makoto cameron New
    Builder

    Joined:
    Nov 11, 2020
    Messages:
    29
    Likes Received:
    8
    Great idea, thanks again
     
    #6 Makoto cameron, Apr 27, 2021
    Peter Van Der Walt likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice