Welcome to Our Community

Some features disabled for guests. Register Today.

ooznest OX CNC Machine

Discussion in 'CNC Mills/Routers' started by Ryan Lock, Apr 28, 2015.

  1. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,478
    Likes Received:
    1,920
    I use a fishing scale to pull my belts to 12kg tension, making sure all the belts are the same tension.
    This removes the guesswork from belt tension, something I had problems with before I pulled out the fishing scale.
     
  2. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,193
    Likes Received:
    532
    Without the 0.5mm spacer the dual belt will be loose, this might be part of your issue. Many people use a double sided tape with the required thickness or glue something in between, I used cheap pultruded carbon fiber 6x0.5mm strips like $4 a meter.
    When I cut holes they do turn out slightly undersize, with what I do I just deal with it. If I need it to be spot on like for a bearing I will do a test cut and adjust the diameter of the cutter in the software until it's a snug fit.
    Gary
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice