Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Open build controlV1.0.253

Discussion in 'General Talk' started by Rod13, Nov 10, 2020.

  1. Rod13

    Rod13 New
    Builder

    Joined:
    Oct 11, 2020
    Messages:
    22
    Likes Received:
    47
    Hi all
    Was trying to run a Gcode file, using a 3/16 VBit. Tried to load the file into control software. It was taking a while to load and then the program went to a white screen. See the attach photo. Is there a bug in the software?
    Thanks Rod Openbuilds.PNG Openbuilds1.PNG
     
    #1 Rod13, Nov 10, 2020
  2. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,449
    How big is the file? Attach it.
     
    #2 sharmstr, Nov 10, 2020
  3. Rod13

    Rod13 New
    Builder

    Joined:
    Oct 11, 2020
    Messages:
    22
    Likes Received:
    47
    The file is 173,000+ KB, this was done in VCarve desktop.
     

    Attached Files:

    #3 Rod13, Nov 10, 2020
  4. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,262
    Likes Received:
    4,357
    That is massive, disable the 3D viewer from Troubleshooting Tab > Application Diagnostics, there is no way we'll be able to render a file that big, then you just re-enable for smaller jobs
    The file has just under 8 million gcode moves in it! :)


    Which feels like too many for a simple Photo Carving, are you sure you set all the parameters correctly in Vectric?
    Can you upload the VCarve project too?
     
    #4 Peter Van Der Walt, Nov 10, 2020
    Rod13 and sharmstr like this.
  5. Rod13

    Rod13 New
    Builder

    Joined:
    Oct 11, 2020
    Messages:
    22
    Likes Received:
    47
    Thanks , I will do that. A lot of detail in that file. I will keeps that in mind when I do my projects.
    Thanks Rod
     
    #5 Rod13, Nov 10, 2020
    Peter Van Der Walt and sharmstr like this.
  6. Rod13

    Rod13 New
    Builder

    Joined:
    Oct 11, 2020
    Messages:
    22
    Likes Received:
    47
    Here the project
    Re did the file, using the same tool and carving method. This came out to 369 mb.
     

    Attached Files:

    #6 Rod13, Nov 10, 2020
    Peter Van Der Walt likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice