Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

OX AI

Discussion in 'CNC Mills/Routers' started by Robert Hummel, Feb 3, 2014.

OX AI

OX AI

Discussion in 'CNC Mills/Routers' started by Robert Hummel, Feb 3, 2014.

This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform

OX cnc diy vgroove openbuilds
Page 9 of 17
  1. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    I was originally thinking of using plastic rain guttering, blocked at each end, :duh: to anodise my rail.
    Blue looks good. However, I realise one off pieces are easy, but you need to be really precise, with the timings and temperatures, to get to get all the pieces exactly the same colour.

    Anyhow, I managed to get Black anodised track, so that idea will have to wait for the next build.
     
    #241 GrayUK, Aug 2, 2014
  2. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Sorry for the delays but I'm super busy......
    The kits are coming :)
     
    #242 Robert Hummel, Aug 5, 2014
  3. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    To the Christmas Coca Cola song:-
    :thumbsup::thumbsup::thumbsup: :thumbsup::thumbsup::thumbsup: :thumbsup::thumbsup::thumbsup: :thumbsup::thumbsup::thumbsup:
    All the kits are coming.     All the kits are coming. All the kits are coming. All the kits are coming.
    :thumbsup::thumbsup::thumbsup: :thumbsup::thumbsup::thumbsup:
    All the kits are coming. All the kits are coming. (Disappearing into the distance) [​IMG]

    You knew that was coming didn't you? :ROFL::ROFL:

    Gray
     
    #243 GrayUK, Aug 5, 2014
  4. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    :p
    Hahahahaha! :ROFL::ROFL:
     
    #244 Robert Hummel, Aug 5, 2014
  5. planga

    planga New
    Builder

    Joined:
    May 10, 2014
    Messages:
    23
    Likes Received:
    3
    Hi Robert,

    Nice work! Can you post the price of the kit and a list of contents? ...or if you'd rather PM me, that would be fine too. Shipping would be to Atlanta.

    Thanks!
     
    #245 planga, Aug 5, 2014
  6. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    The kits contain...
    Main 4 plates with belt clips/M3 hardware
    Custom end plates with belt clips/M3 hardware
    Z Axis plates with 608zz bearings, universal mounting NEMA 17/23
    3 Nema 23 motor spacers milled from cast acrylic "RED"
    Name plate/brace
    4 x M5 x 65 mm bolts for X carriage
     
    #246 Robert Hummel, Aug 6, 2014
    Last edited: Aug 8, 2014
  7. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Hi Robert.

    Sounds good to me. What's the ETA my friend?
    Perhaps you will PM me regarding the final costs?

    Can't remember if I gave it to you. [email protected]

    Cheers
    Gray
     
    #247 GrayUK, Aug 6, 2014
    Robert Hummel likes this.
  8. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    My regular job has me on nights so I can't mill anything, it's a pain but pays the bills and must come first.
    I also had to build and setup my sons new room.
    Gotta love ikea and hate it at the same time.
    image.jpg
    Also had to build the PC and install windows.
    He starts J K this sept
    image.jpg
     
    #248 Robert Hummel, Aug 6, 2014
    Mark Carew, GrayUK and dddman like this.
  9. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    All Nema 23 spacers are milled and cleaned :)
    image.jpg

    On to cleaning and packing of the plates :thumbsup:
    image.jpg
     
    #249 Robert Hummel, Aug 7, 2014
    Last edited: Aug 7, 2014
    joe.carson and GrayUK like this.
  10. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,440
    Nice work Robert! :thumbsup:
     
    #250 Mark Carew, Aug 7, 2014
    Robert Hummel likes this.
  11. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I have not posted some files as I was tweaking them before posting.
    All files will be uploaded soon, upper and lower Z plates are what you ment buy the spindle plates ?
    The files are done just need to upload them :)
     
    #251 Robert Hummel, Aug 8, 2014
  12. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    And the final part of kit 1
    image.jpg

    First is now packed and on to the next ;)
    image.jpg
     
    #252 Robert Hummel, Aug 8, 2014
  13. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Hey! :eek:

    I hope you don't cut all this on the living room carpet!!!! :banghead:

    LOL :D
     
    #253 GrayUK, Aug 8, 2014
  14. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I thought you where saying Hi, From Frank lol

    I will try to get the rest of my files posted by the end of the weekend.
    I have a lot of milling to do now lol

    Just don't know how to keep myself from posting OX Porn :p
     
    #254 Robert Hummel, Aug 8, 2014
  15. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Haha no I wouldn't be alive if I did ;)
    Mind you it would be a good way to get the landlord to replace this 1960 office carpet :mad:
    That is my OX that's waiting for some over due work since all the electronics have now arrived :thumbsup:
    So much to do and such little time.

    I have to mill a set of end plates that have my belt clip design since I have the original design plates on it now and I'm replacing all the wheels with the new heavy duty wheels just because I can while I'm still at this stage of the build.
     
    #255 Robert Hummel, Aug 8, 2014
  16. joe.carson

    joe.carson New
    Builder

    Joined:
    Jul 16, 2014
    Messages:
    11
    Likes Received:
    1
    Hi Robert,

    the finished kit looks really nice. Good work!
    I was also working during the weekend at the new bedroom for my son. :) I now need a door plate and a CNC would come in handy.;)

    If you have milled enough kits, it would be great if you could let me know the shipping costs to Germany and kit price and content. I PM you already my address.

    Thanks,
    Joe
     
    #256 joe.carson, Aug 10, 2014
  17. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Once the next two kits are done I will message you, it's just a matter of cleaning and packing.
    I'm on nights right now so house is sleeping when I'm up and it's hard for me to get anything done.
    Also need to pick up some M3 hardware today on my way in to work
     
    #257 Robert Hummel, Aug 11, 2014
  18. joe.carson

    joe.carson New
    Builder

    Joined:
    Jul 16, 2014
    Messages:
    11
    Likes Received:
    1
    Thanks Robert for confirming! :)
    Don't worry I'm not in a hurry, I just want to be sure I can get the kit from you, so that I can place the order for the other components.

    Kind Regards
    Joe
     
    #258 joe.carson, Aug 11, 2014
    Robert Hummel likes this.
  19. Jestah

    Jestah Well-Known
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    148
    Likes Received:
    84
    Count me in for a full set in the next batch too!
     
    #259 Jestah, Aug 12, 2014
    Robert Hummel likes this.
  20. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    So, what do you reckon Robert?

    Two CNCs cutting at a time now. It's got to be worth it. :thumbsup:
    Get the Hummel Family members involved.

    "The Hummel Milling Company" :rolleyes:

    A good little Canadian cottage industry there!
    Got a ring about it. :)

    Gray
     
    #260 GrayUK, Aug 12, 2014
    Robert Hummel likes this.
  21. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I really need a more faster and efficient way of cleaning the plates up.
    Picked up the M3 hardware today
     
    #261 Robert Hummel, Aug 12, 2014
  22. Jestah

    Jestah Well-Known
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    148
    Likes Received:
    84
    @Robert Hummel what about a sand/glass bead blaster? I am happy to buy a "raw" kit and test it out as we have a blaster at work.

    Have you ever made an ox kit that can accept a 80x20 mm stick for the Z?
     
    #262 Jestah, Aug 13, 2014
  23. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I have included all the finalized files in a new Zip enjoy! And hope it helps
     
    #263 Robert Hummel, Aug 14, 2014
  24. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I have not tryed the 20x80 but that's easy as spacing the holes 10mm more each way ;)
    I have a blasting gun and 50kg bag of beads and tried it with my 3 gallon compressor, the CFM is way to low but gave me a good idea of what the finish would be and I like it.
    Just in order to do things right and SAFE I need a chamber and bigger compressor.
    I'm told a 4-6 CFM @90psi is what I need min with a good water separator inline :)
     
    #264 Robert Hummel, Aug 14, 2014
  25. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    No problem :cool:
     
    #265 Robert Hummel, Aug 14, 2014
  26. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Just have the main side plates to clean up and pack then kit 2 & 3 will be done:D
    image.jpg
    This night shift has put a damper on things but it is what it is :confused:
     
    #266 Robert Hummel, Aug 14, 2014
  27. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,892
    Likes Received:
    1,551
    Robert....

    If you'd finish that machine you keep using as a display prop, you could turn out a whole lot more plates.... ;)

    Just sayin'.



    (actually, j/k :ROFL:)
     
    #267 Rick 2.0, Aug 14, 2014
  28. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I know lol
    I ran out of plate, only have one updated side done and now I want to upgrade its wheels to the new solid wheels for heavier weight.

    Also I'm going to have to take a break from all the kits and plate sets till it's done along with the printer
    But right now my inbox is on fire lol
     
    #268 Robert Hummel, Aug 14, 2014
    Jestah likes this.
  29. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Just got my kit. They are terrific! :D

    I was a little disappointed though, cos I didn't get a bottle of Genuine Maple Syrup with them! :ROFL:

    Gray
     
    #269 GrayUK, Aug 14, 2014
    Robert Hummel likes this.
  30. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    We'll there is an idea!
    I was trying to think of something to include :ROFL:
     
    #270 Robert Hummel, Aug 14, 2014
Page 9 of 17

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice