Welcome to Our Community

Some features disabled for guests. Register Today.

Prolite x-32 BB retro fit spindle not working

Discussion in 'CNC Mills/Routers' started by jereme shelly, Feb 5, 2023.

  1. jereme shelly

    Builder

    Joined:
    Feb 4, 2023
    Messages:
    1
    Likes Received:
    0
    just purchased a x-32 BB to retro fit a prolite 1000 mill i acquired a few years ago and just getting around to working on it. i got the wiring completed yesterday which i believe is correct as I am completely new to cnc. i got everything fired up and the steppers powered up but wouldn't move just clicked. then read that I should try switching the machine to something other than custom build used mini mill this allowed me to jog the steppers after i shut down and saved it. But i still haven't been able to get the spindle to move/spin. I have set the meanwell to 24v leaving adjusted the 0-10v to 10v on the bb x-32 and have the 2 wires coming from the board in the back of the pro lite which i believe is a vfd could be wrong hooked up to the 0-10v on the bb x-32. When i plug the power cords in from the prolite the relay clicks. But when i try and turn the spindle on in open builds the spindle light on the x-32 engages and nothing happens. Any direction or info would be great thanks.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice