Welcome to Our Community

Some features disabled for guests. Register Today.

[RHINOCAM] Safe Z above material

Discussion in 'CNC Mills/Routers' started by John Faik, Jul 18, 2023.

  1. John Faik

    John Faik New
    Builder

    Joined:
    Jul 11, 2023
    Messages:
    2
    Likes Received:
    0
    I need to inquire about setting the safe Z distance above material at start of the gcode.
    - is it a setting already set or modfied ?

    - When I checked the hello world video, the machine started at point and then started to move ahead to do the whole job.

    - To make the inquiry brief, my question is: how to make sure that Z will go up first safe distance when moving from zero work coord. to the start point of the job ?

    the current operation is that Z moves directly above the material without safe distance.

    Used resources:
    - Contoller card: MKS DLC V2.1
    - Firmware version: v1.1h (2019-08-25) hex file
    - Software: Openbuilds control v1.0.370
     
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,921
    Likes Received:
    4,291
    What CAM application are you using?

    Most CAMs add it, some allow you to configure it per-toolpath, or in stock setup. More advanced CAMs use Machine Coordinates (Fusion etc)
     
  3. John Faik

    John Faik New
    Builder

    Joined:
    Jul 11, 2023
    Messages:
    2
    Likes Received:
    0
    Hi Peter,

    I’m using RhinoCam
     
  4. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,921
    Likes Received:
    4,291
    Unfortunately not one we are particularly knowledgable on, so you may want to refer back to the CAM vendor or their documentation. Or online search rhinocam setting z clearance height - Google Search

    Will edit the detail into your original thread title for you, see if anyone else might have worked with it
     
    John Faik likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice