Welcome to Our Community

Some features disabled for guests. Register Today.

Soon to be cnc router user - questions...

Discussion in 'CNC Mills/Routers' started by Victor Marland, Aug 7, 2023.

  1. Victor Marland

    Builder

    Joined:
    Aug 7, 2023
    Messages:
    1
    Likes Received:
    0
    I am wanting to buy a 1m2 Ooznest Workbee or similar wood router soon.

    I already have my own cad cam software (One CNC) which can post out to Mach3 among a host of other posts.

    Am I correct in thinking that if I bought the Workbee without any software, I could send G code to the machine and use it properly? I take it Ooznest provide connection software for mac / windows at a minimum?

    Anyone using any other software than the ones they sell?
     
  2. Alex Chambers

    Alex Chambers Master
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    2,773
    Likes Received:
    1,358
    By default Ooznest sell the workbee kit with the Duet controller - it uses Rep-Rap dialect of g-code and is not compatible with Mach control software.
    The Duet comes with control software which is compatible with windows or mac as the user interface is written as a web page (store on the Duet - no Internet access required after setting up).
    If you want to stick with Mach then you would need to source your own controller - perfectly possible but you would need to work out what you needed - Ooznest are fairly restricted to the Duet.
    Or, of course, you could switch to a grbl controller - have a look at the Blackbox X32 from Openbuilds.

    docs:blackbox-x32:start [OpenBuilds Documentation]

    Alex.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice