I am a newbe to this site and to cnc world .I have a intellicarve 1015 pro , I bought from a friend a few months ago. Been learning to run and turning out some pretty cool carvings , The other day was running a carving , almost at the end of program the cutting tool got caught in a piece of wood and stalled the spindle, by the time I hit the kill switch spindle had stopped turning. After disassembling I found a blown fuse ( 6A/250V ) Bought another and replaced. Now when I run a program everything works as it should ( x,y,z ) except the spindle will not come on to carve. I have been trying to find a new driver board ( have 110 going into board but nothing coming out to spindle ) but can't seem to find anything that looks similar. The # on the board in question is Type BLDC 55-3-2130513 , The spindle is Madeson BLDC-55 115v-50/60hz 5A ( 21000 rpm 500w ) , haven't been able to find service help locally as they don't make this machine any longer ( kind of weird , machine is only 6 years old ) , is there another type of driver that will work on this machine, hopefully a plug and play type of thing. any other suggestions would be very helpful. uploaded a couple pics of the board I think is bad.
