Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Stepper Motors

Discussion in 'Motors' started by Michaei, Jan 14, 2023.

  1. Michaei

    Michaei New
    Builder

    Joined:
    Oct 5, 2018
    Messages:
    25
    Likes Received:
    6
    Stepper motors are moving in the opposite direction when jogging. Please help.
     
    #1 Michaei, Jan 14, 2023
  2. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,016
    Likes Received:
    1,682
    Which ever motor is going the wrong direction, take one pair of the motor wires and switch them around.
     
    #2 Giarc, Jan 14, 2023
  3. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,016
    Likes Received:
    1,682
    I assume that was for a Y axis where it was causing the gantry to rack. If not, you can easily change directions in the grbl settings. You can invert the $3 setting for each axis.
     
    #3 Giarc, Jan 14, 2023
  4. Michaei

    Michaei New
    Builder

    Joined:
    Oct 5, 2018
    Messages:
    25
    Likes Received:
    6
    Giarc, Thank you very much. Everything seems to be working at it should.
     
    #4 Michaei, Jan 14, 2023
    Peter Van Der Walt likes this.
  5. Michaei

    Michaei New
    Builder

    Joined:
    Oct 5, 2018
    Messages:
    25
    Likes Received:
    6
    Why do the motors have a humming sound?
     
    #5 Michaei, Jan 14, 2023
  6. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,051
    Likes Received:
    4,313
    Because thats the normal sound a stepper makes while braked because steppers use pseudo sine waves created by a chopper driver
     
    #6 Peter Van Der Walt, Jan 14, 2023
  7. Michaei

    Michaei New
    Builder

    Joined:
    Oct 5, 2018
    Messages:
    25
    Likes Received:
    6
    Thanks, Peter, for the information. Maybe you can help me with the xyz probe. I can't seem to get it to work on the black box 32X. Any help to resolve this issue is greatly appreciated. I have tried everything except reversing the wires. Not sure if it would damage the black box.
     
    #7 Michaei, Jan 14, 2023
  8. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    #8 sharmstr, Jan 14, 2023
  9. Michaei

    Michaei New
    Builder

    Joined:
    Oct 5, 2018
    Messages:
    25
    Likes Received:
    6
    Sharmstr, Sorry the probe doesn't move or respond.
     
    #9 Michaei, Jan 14, 2023
  10. Michaei

    Michaei New
    Builder

    Joined:
    Oct 5, 2018
    Messages:
    25
    Likes Received:
    6
    Sharmstr, Thank you for the help. Probe is working.
     
    #10 Michaei, Jan 14, 2023
    sharmstr likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice