Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

XYZ Probe issues

Discussion in 'General Electronics' started by jnsbanman, Feb 10, 2021.

  1. jnsbanman

    jnsbanman Well-Known
    Builder

    Joined:
    Dec 15, 2015
    Messages:
    48
    Likes Received:
    28
    So finally got my new 1515 up and moving and spindle turning... YAY

    Tried to get the XYZ probe working (openbuilds brand)

    I center the bit over the hole click confirm then probe... it gets within 5-10mm of the plate but never touches it so my zero point ends up being of the board somewhere...

    What am I doing wrong here... Magnet seems to be making good contact... light goes brighter when i touch the plate to the bit manually.

    Help please!
     
    #1 jnsbanman, Feb 10, 2021
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,193
    Likes Received:
    4,346
    Incorrect wiring somewhere


    Light should be OFF until it makes contact.
     
    #2 Peter Van Der Walt, Feb 10, 2021
  3. jnsbanman

    jnsbanman Well-Known
    Builder

    Joined:
    Dec 15, 2015
    Messages:
    48
    Likes Received:
    28
    Hm.. probably reverse order on the BB side connector... ugh I thought i made 100% sure i didnt do that lol. Will go check right now
     
    #3 jnsbanman, Feb 10, 2021
    Peter Van Der Walt likes this.
  4. jnsbanman

    jnsbanman Well-Known
    Builder

    Joined:
    Dec 15, 2015
    Messages:
    48
    Likes Received:
    28
    IDK... i unplugged it plugged it (the probe) back in and it works fine now... dont i feel stupid
     
    #4 jnsbanman, Feb 10, 2021
    Peter Van Der Walt likes this.
  5. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,193
    Likes Received:
    4,346
    Glad you are back up and running :)
     
    #5 Peter Van Der Walt, Feb 11, 2021
  6. jnsbanman

    jnsbanman Well-Known
    Builder

    Joined:
    Dec 15, 2015
    Messages:
    48
    Likes Received:
    28
    Thank you!
     
    #6 jnsbanman, Feb 11, 2021
    Peter Van Der Walt likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice