Cnc

merveilleux

I am very impatient to have the files I want to make this C -beam machine.
You have make a good job, I have try to make some parts on Solidworks but without quotation it's more difficult.

Thanks, Soon very soon. All files will be posted in the build thread. Waiting on a few more parts to arrive. Then the build begins. Working on the build guide steps as I type this.

Kyo -

What bed are you considering? I am planning to have a mister believe a metal bed is in my future.

Really like your build ideas and YouTube videos. Keep up the great work!

Brad

www.UltiBots.com
==================
Modified C-Beam Bundle
Dewalt 611
Elaire 1/8" Collet
1/8" Single Flute Carbide End Mill
Workflow = Fusion 360 & Cam > Chilipeppr > Tinyg
Feed = 20"/min (508mm/min), Ramp = 10"/min (245mm/min), Plunge = 8"/min (203.2mm/min)
Pocket cut = 0.25mm rough & 0.2mm finish, 3mm max stepover
Bore cut = 0.2mm pitch
Contour cut = 0.25mm rough & 0.2mm finish

Thank you. I tend to have a lot of wacky ideas but most seem to work out lol

For bed I am not 100% decided as of yet. My first thought is going with a base 1/4" aluminium plate something like Mic 6 for flatness and to add a extra bit of weight and rigidity to the frame. Followed by two replaceable 1/2" mdf spoiler boards.

With the flat vertical walls the back side of the C-beam offers in this build; incorporating say a vacuum formed form fitted "tub" that could be secured in place and provide a water tight area for mist coolant or even flood coolant might be possible. It would just be a matter of swapping it in and out when needed.

I have found the following bed extrusion and clamping kit for 6mm T-Slots.

• Aluminum Extrusion Table Plates
  
• Clamping Kit, 6 mm T-Slot

I am considering a group purchase. Let me know if you have any interest. - Brad

Just got your email, sorry for the slow response I have been filming all day. so I will just reply here.

Nice find, I will have to bookmark those links. I am afraid I can not jump on a group buy currently. My build budget for this cnc is tapped. As designed you would need a 420mm wide by 500mm long bed to fit this build.