Separate names with a comma.
Some features disabled for guests. Register Today.
I found out what's wrong. My gantry was to tight. I loosened the gantry at much as possible, and it solved the problem.
The issue is not calibration, it should be on both sides of X0 if calibration where the reason The 2 mm, would not be exact the same, when the...
Hi Im trying to figure this out, and i am running out of idea´s When moving from G1 X0 F10 To G1 X10 F10 And Again G1 X0 F10, im loosing 2 mm The...
