Separate names with a comma.
Some features disabled for guests. Register Today.
Kevin p submitted a new resource: 8mm eccentric spacer - Larger eccentric nut/spacer for more rigid builds This is an 8mm eccentric for use with...
This is an 8mm eccentric for use with the openbuilds wheels and 688Z bearings. These also have a longer 12mm insert sleeve so the aluminum plates...
I'm running 1500x3000mm set up - the main rails need to be 5010 extrusion however so the holes for the wheels need to be moved 20mm up. I also...
Speed isn't really an issue - it can already move faster than a 3hp router can cut so getting a good spindle will help more than trying to...
For current adjustment there is only very minor adjustment on the board short of reducing amps going to the motors at the downside of reducing...
The pinion will need two holes drilled and tapped for set screws, and the racks will need some trimming to be flush and requires the use of 5010...
Rack - https://www.finelineautomation.com/products/gear-rack?taxon_id=38 Motors -...
Gecko 203V powering 570oz Nema 23s pulling 5A each. It's not painful to touch the motors but they're still running hotter than I'd like and I...
What are you using for cooling the motors? My Nema 23's are running pretty hot and I'd be a lot more comfortable if they had some decent cooling...
Surface work only or deeper cuts? Would you suggest going all delrin or the 6/2 combo you're currently running? Most of my work is going to be...
Those of you trying steel wheels on the aluminum how is the wear? Those trying delrin how's the accuracy with running those? I have most of my...
Great to hear business is booming for you! Have you had any deflection issues with the gantry so far? I've been planning on a 3qty 20x60 or 3qty...
I've been looking at the rack and pinion and I was wondering if the racks mounted on the Y rails could be wider (without adding spacers) if they...
Have you had much chatter with the long gantry? I'm working through the final designs for a similar gantry and I want to make sure it's functional...
